Quantitative Aptitude – Percentages
For CSIR‑NET JRF | MIT‑Level Treatment
Goal: Master percentages from first principles, understand why formulas work, explore edge‑cases, and solve challenging problems.
1. Foundations
1.1 What is a “percent”?
| Symbol | Meaning | Example |
|---|---|---|
| (p) | A number expressed as a fraction of 100 | 15 % = 15/100 = 0.15 |
| (p%) | “(p) percent” | 30 % of 200 = 0.30 × 200 = 60 |
Key Idea
A percent is just a ratio with denominator 100. Thus every percent problem boils down to basic proportional reasoning.
1.2 Why 100?
- Historically, measurements were often in “parts per hundred” because of the decimal system.
- Mathematically, choosing 100 as a base is arbitrary; any integer (k) could be used. The convenience is that we can read the numerator directly as a percentage.
2. Core Formulas – Derived from First Principles
Let
- (A) = original amount
- (B) = new amount
- (p%) = percentage change (positive for increase, negative for decrease)
2.1 Direct Percentage of a Quantity
[ \boxed{\text{Amount} = \frac{p}{100}\times A} ]
Derivation:
(p%) means (p/100) of (A). Multiplying gives the desired portion.
2.2 Percentage Change
[ \boxed{p% = \frac{B-A}{A}\times 100} ]
Derivation:
The difference (B-A) is the absolute change. Dividing by the original (A) yields the fractional change; multiplying by 100 converts to a percent.
2.3 Finding the Original from a Known Percent
If you know that (B) equals (p%) of (A):
[ A = \frac{B}{p/100} = \frac{100B}{p} ]
2.4 Reverse Percentage (Finding the New Value)
If (A) is increased/decreased by (p%):
[ B = A \times \left(1 + \frac{p}{100}\right) ]
Proof:
(A + (p/100)A = A(1+p/100)).
3. Deeper Theory
3.1 Percentage as a Linear Transformation
The mapping (T_p(A) = A(1+p/100)) is an affine function of (A).
- Slope = (1+p/100).
- Intercept = 0.
Thus percentages scale values linearly.
3.2 Composition of Percentages
If you apply two consecutive percentage changes (p%) then (q%):
[ B = A\left(1+\frac{p}{100}\right)\left(1+\frac{q}{100}\right) ]
This is not simply ((p+q)%).
- Why? Because each change is applied to the already altered amount.
Example
Increase by 10 % then 20 %:
(A × 1.10 × 1.20 = A × 1.32) → 32 % total increase, not 30 %.
3.3 Inverse Percentages
Given a final value (B) and a percent change (p%), the original is
[ A = \frac{B}{1 + p/100} ]
If the change is negative (decrease), the denominator becomes (1 - |p|/100).
3.4 Percentages and Ratios
Percentages can be derived from ratios:
[ \frac{A}{C} = \frac{p}{100} \quad \Longrightarrow \quad p = \frac{A}{C}\times100 ]
This is extremely useful in problems involving “ratio of X to Y”.
4. Edge Cases & Common Pitfalls
| Situation | Typical Mistake | Correct Approach |
|---|---|---|
| Negative percentages | Treating (-20%) as “-20 % of (A)” → (-0.20A) | Use (B = A(1-0.20) = 0.80A) |
| Increase followed by decrease | Adding or subtracting percentages linearly | Compute multiplicatively: (A⋅1.10⋅0.90 = 0.99A) |
| Percent of a percent | Misinterpreting “20 % of 20 % of 200” | Sequential: (200×0.20×0.20 = 8) |
| Percentages > 100 % | Assuming “200 % of 50” → 100 | (200% = 2.0), so (50×2 = 100) |
| Zero denominator | Dividing by a 0% value | Avoid; interpret as “undefined” or “infinite” change |
5. Advanced Topics
5.1 Compound Interest (A Special Case)
The formula (A(1+r)^n) is a repeated application of a percentage increase (r%) each period.
- Effective annual rate from monthly rate (r_m%): [ r_{\text{eff}} = \left(1+\frac{r_m}{100}\right)^{12}-1 ]
5.2 Percentile
Distinct from “percent”. In statistics, the k‑th percentile (P_k) is the value below which (k%) of observations lie.
5.3 Percent Change vs. Absolute Change
- Absolute: (B-A).
- Relative (percent): ((B-A)/A).
- In some contexts, the relative change is more meaningful (e.g., growth rates).
5.4 Edge‑Case: Zero Base
If (A=0), the percent change formula ((B