CSIR NET JRF /Reasoning Ability

Direction sense

Logical Reasoning · free study notes

Direction Sense – CSIR‑NET JRF (Reasoning Ability)


1. What is Direction Sense ?

In reasoning questions, direction sense tests a test‑taker’s ability to deduce the relative positions of objects or people when only directions (North, South, East, West, or relative terms such as “left of”, “next to”, “diagonal”) are given.
It is the reasoning counterpart of geometry’s vector addition – you have to “add” directions to arrive at the final position.


2. Core Concepts

Symbol Meaning Example
N North (up) “John is north of Mary” → John is above Mary
S South (down) “Anna is south of Tom” → Anna is below Tom
E East (right) “Sam is east of Alex” → Sam is right of Alex
W West (left) “Lily is west of Mark” → Lily is left of Mark
NE, NW, SE, SW Diagonal directions (45°) “Paul is NE of Steve” → Paul is upper‑right of Steve

Rule of thumb: North = up, South = down, East = right, West = left.


3. Types of Direction‑Sense Questions

Type Typical Prompt Strategy
Relative Position “A is to the north of B, and B is to the east of C.” Create a grid or use coordinates; add vectors.
Sequential Moves “After moving two steps north and then one step east, X ends up at Y.” Treat each move as a vector; sum them.
Clockwise/Counter‑Clockwise “If A is 60° clockwise from B, where is B relative to A?” Convert angles to cardinal directions; use 90°, 180°, 270° shortcuts.
Simultaneous Constraints “Three people are seated so that A is to the left of B, and B is to the right of C.” Use elimination; check all possibilities.
Mixed Directions “P is north of Q, Q is east of R, and R is west of S.” Build a chain and back‑track.

4. Representing Directions Mathematically

A convenient way to avoid confusion is to treat each direction as a vector in a 2‑D Cartesian plane.

Direction Vector
N ((0, +1))
S ((0, -1))
E ((+1, 0))
W ((-1, 0))
NE ((+1, +1))
NW ((-1, +1))
SE ((+1, -1))
SW ((-1, -1))

Adding vectors gives the net direction.
Example:

  • “A is north of B and east of B” → A’s vector w.r.t. B is ((+1, +1)) → NE of B.

Tip: Scale the unit vectors if the question mentions “two steps north” vs “one step east”; keep the scale consistent.


5. Common Pitfalls & Tricky Points

Pitfall Why it Happens Fix
Confusing “to the left of” with “to the left when facing” Direction depends on the observer’s orientation. Always ask “in the context of the observer” or use “facing” as a cue.
Assuming diagonal = 45° Some problems may use “next to” to mean “immediately adjacent” but not strictly diagonal. Read the wording. If “diagonal” is used, treat it as 45°.
Ignoring “turning” statements “After turning 90° right” can change the reference frame. Update the coordinate system accordingly.
Over‑counting steps “Two persons are separated by one person” vs “two steps apart.” Count the number of intervening persons.
Misreading “clockwise” vs “counter‑clockwise” 60° clockwise from North is actually NE; 60° counter‑clockwise from North is NW. Write down the reference direction and turn appropriately.

6. Step‑by‑Step Strategy

  1. Draw a rough sketch or set up a 2‑D coordinate system.
  2. Assign a reference point (usually the first person mentioned).
  3. Translate each directional relation into a vector.
  4. Add/subtract vectors to compute positions of all entities.
  5. Cross‑check for consistency (no contradictions).
  6. Answer the question by referring back to

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.