📚 Maharashtra PSC – Quantitative Aptitude
Topic: Tables
Tables are one of the most common question types in competitive exams such as the Maharashtra Public Service Commission (PSC) or IIT‑JEE (for quantitative sections). They involve arranging numbers or items in a matrix according to a set of constraints. Mastery of tables requires logical deduction, careful bookkeeping and a systematic approach.
1. General Strategy
| Step | What to Do | Why |
|---|---|---|
| 1. Read All Conditions | Write every given rule on a sheet. | Ensures you don’t miss any constraint. |
| 2. Pick a Working Order | Choose a reference row/column (e.g., the row with the most conditions). | Reduces the branching factor. |
| 3. Create a Grid | Draw the table, label rows/columns, and fill in known entries. | Keeps track of partial solutions. |
| 4. Use Deduction | Apply “only one place” logic, “must be adjacent” rules, etc. | Systematically eliminates impossibilities. |
| 5. Check Consistency | After each placement, verify that all conditions still hold. | Prevents cascading errors. |
| 6. Iterate | If a choice leads to contradiction, backtrack or try a new assumption. | Guarantees eventual success. |
2. Common Types of Constraints and How to Treat Them
| Constraint Type | Example | How to Encode in the Grid |
|---|---|---|
| Position | A is in the first row and third column. | Write A at (row 1, col 3). |
| Relation | B is to the left of C (exactly one column between them). | Place B somewhere, then C two columns right. |
| Adjacency | D must be adjacent to E (horizontally or vertically). | Mark possible spots for D and E that share a side. |
| Row/Column Constraints | The sum of row 2 is 30. | Keep a running total for each row. |
| Ordering | F is higher than G. | Decide which row is higher (row 1 > row 2 > row 3). |
| Exclusion | H cannot be in the last column. | Shade out last column for H. |
3. Typical Table Sizes and Notations
| Size | Example | Notation |
|---|---|---|
| 2 × 2 | 4 items | R1C1, R1C2, R2C1, R2C2 |
| 3 × 3 | 9 items | R1C1 … R3C3 |
| 4 × 4 | 16 items | R1C1 … R4C4 |
Tip: Always use the same notation throughout the solution.
4. Deriving “Only‑Place” Rules
Often a rule states that an item can occupy only one cell because of all other constraints. To derive it:
- List all possible cells for the item.
- Apply other constraints to eliminate cells.
- Count remaining possibilities. If only one, place it.
Example:
Rule: The person who bought a laptop is not in the first row.
Derivation: If the grid is 3 × 3, the laptop person cannot be in any cell of row 1 (cellsR1C1,R1C2,R1C3). So they must be in rows 2 or 3.
5. Handling “Must Be Adjacent” Constraints
Adjacency can be horizontal, vertical, or both.
- Horizontal adjacency: Two cells share a side in the same row.
- Vertical adjacency: Two cells share a side in the same column.
Method:
- Draw a neighborhood map for each candidate cell.
- Mark cells that satisfy adjacency.
- If only one pair remains, place them.
6. Quick Tricks for Speed
- Fill “must‑be” items first.
If a rule says “X is in the top‑left corner”, place it immediately. - Use “impossible” squares.
If an item cannot be in a cell, shade it to avoid later confusion. - Keep a “list of remaining items”.
Helps avoid re‑checking already placed items. - Check symmetry.
If the table has symmetrical constraints, use that to reduce work.
7. Practice Problem (Hard)
Table Size: 3 × 3
Items: A, B, C, D, E, F, G, H, I
Constraints:
- A is in the middle cell (R2C2).
- B is in the first row.
- C is not in the last column.
- D is adjacent to E (horizontally or vertically).
- F is below G (same column).
- H is not in the same row as I.
- G is to the left of I.
- The sum of the “values” of row 1 is 15, row 2 is 12, and row 3 is 9.
(Each item has a value: A=1, B=2, C=3, D=4, E=5, F=6, G=7, H=8, I=9)
Question: Determine the complete arrangement of items.
Solution Outline
- Place A → (R2C2).
- Row & column sums give the set of values per row:
- Row 1: 15 → possible triples: (1,5,9), (2,4,9), (3,4,8), …
- Row 2: 12 → possible triples: (1,2,9), (1,3,8), (1,4,7), (2,3,7), (2,4,6), (3,4,5)
- Row 3: 9 → possible triples: (1,2,6), (1,3,5), (2,3,4)
- B in row 1 → pick a triple containing 2.
Try (1,2,9) for row 1 → cells are R1C1