Karnataka PSC – Reasoning Ability
Figure Series
Objective – To identify the underlying operation that transforms one figure into the next in a sequence and predict the missing figure.
Typical exam time – 2–3 minutes per question.
Key skill – Rapid pattern recognition.
1. What is a Figure Series?
A figure series is a one‑dimensional sequence of geometric diagrams.
The sequence is governed by a single rule (or a small set of rules) that modifies the figure from one term to the next.
The rule can involve:
| Operation | Symbolic notation | Typical effect |
|---|---|---|
| Rotation | R<sub>θ</sub> | Turns the figure by θ degrees |
| Reflection | M<sub>axis</sub> | Mirrors across a line (vertical, horizontal, diagonal) |
| Scaling | S<sub>k</sub> | Enlarges (k > 1) or shrinks (0 < k < 1) |
| Translation | T<sub>Δx,Δy</sub> | Shifts left/right or up/down |
| Addition / Subtraction of elements | +E / –E | Adds or removes a shape |
| Color change | C<sub>c</sub> | Fills/outline changes |
| Combination | * | Concatenation of two figures |
Important: Most problems have one unique rule that fits all terms.
If several rules fit, the most “simple” (fewest operations) is usually the intended one.
2. Common Patterns in Figure Series
| Pattern | Description | Example |
|---|---|---|
| Rotational | Each term is rotated 90°, 180°, 270°, or a variable angle. | Triangle → Rotated 90° → Triangle |
| Reflective | Mirror image each step across a fixed axis. | Square → Mirror horizontally → Square |
| Scaling | Size increases/decreases by a constant factor. | Circle → 2× radius → Circle |
| Translational | Shift in a fixed direction. | Rectangle → Shift right 2 units → Rectangle |
| Additive | Add a new shape each step. | Single triangle → Triangle + square → Triangle + square |
| Subtractive | Remove a part each step. | Shape with a hole → Remove a corner → Shape |
| Color Alternation | Alternate color or fill status. | Outline → Filled → Outline |
| Composite | Combination of two or more of the above. | Rotate 90°, then add a point. |
| Iterative Combination | Each term is a combination of previous terms. | A<sub>n</sub> = A<sub>n‑1</sub> + A<sub>n‑2</sub> |
3. Step‑by‑Step Solving Approach
-
Identify the basic elements
- Count shapes, check their sizes, colours, orientation.
-
Look for simple transformations
- Rotation (90°, 180°?) → use a small “rotator” sketch.
- Reflection → mirror left ↔ right, top ↔ bottom.
- Scaling → compare side lengths or diameters.
-
Check for additions/subtractions
- Is a new shape appearing or disappearing?
- Are there “layers” being added (outline → filled)?
-
Check for positional changes
- Are shapes moving horizontally/vertically?
-
Test combinations
- If one simple rule doesn’t explain all terms, combine two operations (e.g., rotate then add).
-
Validate with all terms
- Apply the rule to the first term → should give the second, and so on.
-
Predict the missing figure
- Apply the rule to the preceding term.
-
Cross‑check for uniqueness
- If two different rules fit, choose the one that uses the least operations.
4. Tricky Points & Pitfalls
| Pitfall | How to Avoid |
|---|---|
| Multiple plausible rules | Verify the rule on all given terms. |
| Ignoring colour changes | Treat colour as a separate property; often the rule is purely geometric. |
| Assuming linear scaling | Check if scaling factor changes (e.g., 1.5×, 2×, 3×). |
| Over‑fitting | Do not invent a new operation for a single odd term; the rule should apply uniformly. |
| Position vs. size | A shift of 2 units can look like a size change if not carefully measured. |
| Symmetry confusion | A figure that appears rotated 180° may actually be a reflection + rotation. |
5. Important “Formulae” / Quick Checks
| Check | How to apply | |-------|