Mensuration – Study Notes for Tamil Nadu Forest Guard (Quantitative Aptitude)
Mensuration is the branch of mathematics that deals with the measurement of geometric figures – areas, perimeters, volumes, surface areas, etc.
It is a core part of the Quantitative Aptitude section in the Forest Guard exam.
1. Simple Explanation
- Perimeter / Circumference – distance around a 2‑D figure.
- Area – amount of space covered by a 2‑D figure.
- Surface Area – total area of all exposed faces of a 3‑D figure.
- Volume – amount of space occupied by a 3‑D figure.
All formulas are derived from basic geometry and algebra. Memorising the key formulas and practising conversions (cm ↔ m, mm ↔ cm, etc.) is essential.
2. Key Points & Formula Sheet
| Figure | Perimeter / Circumference | Area | Surface Area | Volume |
|---|---|---|---|---|
| Circle | (C = 2\pi r) | (A = \pi r^2) | – | – |
| Ellipse | (C \approx \pi [3(a+b) - \sqrt{(3a+b)(a+3b)}]) (Ramanujan’s 2nd approximation) | (A = \pi ab) | – | – |
| Triangle | (P = a+b+c) | (A = \frac{1}{2} \times \text{base} \times \text{height}) | – | – |
| Rectangle / Square | (P = 2(l+w)) | (A = l \times w) | – | – |
| Parallelogram | (P = 2(a+b)) | (A = \text{base} \times \text{height}) | – | – |
| Trapezium | (P = a+b+c+d) | (A = \frac{1}{2} (a+c) \times h) | – | – |
| Regular Polygon | (P = n \times s) | (A = \frac{ns^2}{4\tan(\pi/n)}) | – | – |
| Cube | – | – | (SA = 6a^2) | (V = a^3) |
| Rectangular Prism | – | – | (SA = 2(lw + lh + wh)) | (V = l \times w \times h) |
| Sphere | – | – | (SA = 4\pi r^2) | (V = \frac{4}{3}\pi r^3) |
| Cylinder | – | – | (SA = 2\pi r(h+r)) | (V = \pi r^2 h) |
| Cone | – | – | (SA = \pi r(l+r)) (l = slant height) | (V = \frac{1}{3}\pi r^2 h) |
| Right Circular Cone | – | – | – | (V = \frac{1}{3}\pi r^2 h) |
| Pyramid (regular) | – | – | (SA = A_{\text{base}} + \frac{1}{2} \times P_{\text{base}} \times l) | (V = \frac{1}{3} \times A_{\text{base}} \times h) |
Tips
- Units – Always convert all lengths to the same unit before substitution.
- π – Use 22/7 or 3.14 depending on the question’s requirement.
- Trapezium – When height is not given, use the Pythagoras theorem if a right‑angled trapezium is specified.
- Surface Area of Cylinder – includes lateral area + 2 base areas.
- Cone Surface Area – lateral area + base area.
3. Worked Example
Question (Typical Forest Guard – Mensuration)
A cylindrical water tank has a radius of 5 m and a height of 12 m.
a) Find its volume.
b) Find its total surface area.
c) If the tank is filled with water to 80 % of its capacity, how many cubic metres of water are inside?
Solution
| Part | Calculation |
|---|---|
| a) Volume | (V = \pi r^2 h = \pi (5)^2 (12) = 300\pi\ \text{m}^3). Using (\pi = 3.14): (V \approx 300 \times 3.14 = 942\ \text{m}^3). |
| b) Surface Area | (SA = 2\pi r(h + r)). (= 2 \times 3.14 \times 5 \times (12 + 5)) (= 6.28 \times 5 \times 17) (= 6.28 \times 85 = 533.8\ \text{m}^2). |
| c) Water volume (80 %) | (V_{\text{water}} = 0.80 \times V = 0.80 \times 942 = 753.6\ \text{m}^3). |
Answer
a) 942 m³ (≈ 300π m³)
b) 533.8 m²
c) 753.6 m³ of water
4. Quick Revision Summary
| Concept | Formula | Quick Check |
|---|---|---|
| Circumference | (C = 2\pi r) | Half the perimeter of a circle is a straight line. |
| Area of Circle | (A = \pi r^2) | Square the radius, multiply by π. |
| Area of Triangle | (\frac{1}{2}bh) | Base × height ÷ 2. |
| Area of Rectangle | (lw) | Length × width. |
| Area of Trapezium | (\frac{1}{2}(a+c)h) | Average of parallel sides × height. |