Telangana PSC /Quantitative Aptitude

Time-speed-distance

Speed & Geometry · free study notes

Time – Speed – Distance

Quantitative Aptitude – Telangana PSC
(MIT‑level, first principles, rigorous theory, edge cases, and a challenging problem.)


1. Core Relationship

Symbol Meaning Units
(t) Time elapsed hours, minutes, seconds
(s) Speed (velocity magnitude) km/h, m/s, cm/s
(d) Distance (displacement magnitude) km, m, cm

The fundamental kinematic equation (constant speed) is

[ \boxed{d = s , t} ]

or equivalently

[ s = \frac{d}{t}, \qquad t = \frac{d}{s} ]

All quantitative aptitude problems involving “time‑speed‑distance” are built on this linear relationship.


2. Unit Conversions

Quantity Common Units Conversion Factor
Speed km/h → m/s (1~\text{km/h} = \frac{1000}{3600}~\text{m/s} \approx 0.27778)
Distance km → m (1~\text{km}=1000~\text{m})
Time hours → minutes (1~\text{h}=60~\text{min})
Time minutes → seconds (1~\text{min}=60~\text{s})

Tip: Always convert to a single unit system before plugging values into the core equation.


3. Derivation from First Principles

Consider a particle moving in a straight line with constant velocity (\vec{v}).
By definition of velocity:

[ \vec{v} = \frac{d\vec{r}}{dt} ]

where (\vec{r}) is the position vector. Integrating over a time interval ([0, t]):

[ \int_{0}^{t} \vec{v},dt = \int_{0}^{t} \frac{d\vec{r}}{dt},dt ;;\Longrightarrow;; \vec{v},t = \vec{r}(t) - \vec{r}(0) ]

Taking magnitudes and recognizing that (\vec{v}) is constant:

[ s,t = d ]

Thus the linear relationship is a direct consequence of the definition of velocity and the assumption of constant speed.


4. Edge Cases & Common Pitfalls

Scenario What to Watch For Resolution
Zero speed Division by zero in (t = d/s) Problem is unsolvable unless (d=0); physically, a car that never moves cannot cover distance.
Zero distance Time can be anything if speed ≠ 0 The equation reduces to (0 = s,t); only true if (t=0) or (s=0).
Negative speed Indicates direction opposite to chosen positive axis Keep speed positive; use signed velocity if direction matters.
Time in different units Mixing hours and minutes cause error Convert all times to the same unit before calculation.
Speed changes Problem may involve average speed Use weighted average: (s_{\text{avg}} = \frac{d_{\text{total}}}{t_{\text{total}}}).

5. Advanced Topics

5.1 Average Speed vs. Average Velocity

  • Average speed ignores direction: (s_{\text{avg}} = \frac{\text{total distance}}{\text{total time}}).
  • Average velocity considers displacement: (\vec{v}_{\text{avg}} = \frac{\Delta \vec{r}}{\Delta t}).

In PSC problems, “speed” almost always means average speed.

5.2 Non‑Linear Motion

If speed is not constant, the relationship becomes an integral:

[ d = \int_{0}^{t} s(\tau), d\tau ]

For piecewise constant speeds, split the interval into segments:

[ d = \sum_{i} s_i , t_i ]

5.3 Speed Units in Different Systems

Unit Conversion to m/s
km/h (\times 0.27778)
mph (\times 0.44704)
cm/s (\times 0.01)
ft/s (\times 0.3048)

Understanding conversions is vital for cross‑sectional problems.


6. Worked Example (Typical PSC)

Problem:
A train travels from City A to City B, 240 km apart, in 4 hours. It then returns to City A in 3 hours. What is the average speed for the whole journey?

Solution:

  1. Total distance: (240 + 240 = 480) km.
  2. Total time: (4 + 3 = 7) h.
  3. Average speed: (s_{\text{avg}} = \frac{480}{7} \approx 68.57) km/h.

7. Challenging Problem (MIT‑Level)

Problem (Advanced):
A cyclist rides from point (P) to point (Q) (10 km apart) on a straight road. She rides the first 4 km at a speed that is 20% slower than her average speed for the entire trip. She then rides the remaining 6 km at a speed that is 30% faster than her average speed. If her total travel time is 1 hour, find:

  1. Her average speed for the whole trip.
  2. The speeds for the two legs.
  3. The ratio of the time spent on the first leg to the time spent on the second.

Solution Outline

Let (s_{\text{avg}}) be the unknown average speed (km/h).
Define:

[ s_1 = 0.8, s_{\text{avg}}, \qquad s_2 = 1.3, s_{\text{avg}} ]

Times:

[ t_1 = \frac{4}{s_1}, \qquad t_2 = \frac{6}{s_2} ]

Total time constraint:

[ \frac{4}{0.8, s_{\text{avg}}} + \frac{6}{1.3, s_{\text{avg}}} = 1 ]

Solve for (s_{\text{avg}}):

[ \frac{4

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.