Kerala Patwari / Lekhpal /Quantitative Aptitude

Geometry basics

Speed & Geometry · free study notes

Geometry Basics – Study Notes (Quantitative Aptitude)

Audience: IIT‑JEE/competitive exam aspirants
Focus: Core concepts, derivations, crucial formulae, common traps, and a hard practice problem.


1. Fundamental Concepts

Concept Definition Key Formulae
Point Zero‑dimensional location –
Line Straight one‑dimensional set –
Plane Two‑dimensional flat surface –
Angle Measure of rotation between two rays ( \theta = \frac{\text{arc length}}{r} ) in radians
Triangle Closed figure with 3 sides ( \text{Sum of interior angles} = 180^\circ )
Quadrilateral 4‑sided polygon –
Circle Set of points equidistant from a centre ( r = ) radius; ( C = 2\pi r ); ( A = \pi r^2 )
Perimeter Sum of side lengths ( P = \sum \text{sides} )
Area Measure of surface ( \text{Area}_\triangle = \frac{1}{2}ab\sin C )

2. Coordinate Geometry – Basics

Topic Key Formula Derivation Sketch
Distance Between Two Points ( d = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2} ) By Pythagoras on Δ(x), Δ(y)
Mid‑point ( M\left(\frac{x_1+x_2}{2},\frac{y_1+y_2}{2}\right) ) From average of coordinates
Slope ( m = \frac{y_2-y_1}{x_2-x_1} ) Ratio of Δ(y)/Δ(x)
Equation of a Line ( y - y_1 = m(x-x_1) ) Point‑slope form
Distance from a Point to a Line ( d = \frac{ Ax_0+By_0+C
Area of a Triangle (Coordinate) ( \frac{1}{2}\left x_1(y_2-y_3)+x_2(y_3-y_1)+x_3(y_1-y_2)\right

3. Trigonometry in Geometry

Topic Formula Notes
Basic Trigonometric Ratios ( \sin\theta=\frac{\text{opp}}{\text{hyp}} ), ( \cos\theta=\frac{\text{adj}}{\text{hyp}} ), ( \tan\theta=\frac{\text{opp}}{\text{adj}} )
Law of Sines ( \frac{a}{\sin A}=\frac{b}{\sin B}=\frac{c}{\sin C} ) Use when an angle and opposite side known
Law of Cosines ( c^2=a^2+b^2-2ab\cos C ) Reduces to Pythagoras when (C=90^\circ)
Area using Sine ( \text{Area}=\frac{1}{2}ab\sin C ) Useful when two sides and included angle known
Angle Sum & Difference ( \sin(\alpha\pm\beta)=\sin\alpha\cos\beta\pm\cos\alpha\sin\beta ) Handy for simplifying expressions
Trigonometric Identities (\tan^2x+\sec^2x=1), (\sin^2x+\cos^2x=1) Avoid errors in manipulations

4. Circles – Key Properties

Property Formula Typical Usage
Tangent to a Circle Tangent is perpendicular to radius at point of contact Proving perpendicularity
Chord Length ( L = 2r\sin\frac{\theta}{2} ) When central angle known
Arc Length ( s = r\theta ) (θ in radians) For segments
Sector Area ( A = \frac{1}{2}r^2\theta ) For area between two radii
Power of a Point ( PT \cdot PA = \text{constant} ) For points outside circle

5. Common Tricky Points

Situation Pitfall Fix
Angle Units Mixing degrees & radians Always check unit before plugging into trig
Negative Coordinates Distance formula gives same result Remember to square differences
Circle Equations Forgetting sign of (x^2) or (y^2) Standard form: ((x-h)^2+(y-k)^2=r^2)
Law of Cosines Sign error in ( \pm 2ab\cos C ) Use consistent orientation: (c^2 = a^2+b^2-2ab\cos C)
Trigonometric Identities Misapplying (\tan x = \sin x / \cos x) Verify domain (cos x ≠ 0)

6. Derivation Highlights

6.1 Area of a Triangle from Coordinates

Using determinant:

[ \text{Area} = \frac{1}{2}\left| \begin{vmatrix} x_1 & y_1 & 1\ x_2 & y_2 & 1\ x_3 & y_3 & 1 \end{vmatrix} \right| ]

Expanding gives the coordinate‑area formula above. It is equivalent to cross‑product magnitude.

6.2 Distance from Point to Line

Given line (Ax+By+C=0) and point ((x_0,y_0)):

The distance is the magnitude of the projection of vector ((x_0,y_0)) onto the normal vector ((A,B)).

[ d = \frac{|Ax_0+By_0+C|}{\sqrt

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.