Bar & Pie Charts
Quantitative Aptitude – Kerala Patwari / Lekhpal Exam
1. Simple Explanation
| Chart | What it shows | When to use |
|---|---|---|
| Bar Chart | Frequency or quantity of discrete categories. | When you have a set of categories (e.g. “Number of students in each class”) and you need to compare their values. |
| Pie Chart | Proportional composition of a whole. | When you want to show how a total is divided into parts (e.g. “Market share of smartphone brands”). |
- In a bar chart, each bar’s height (or length) is proportional to its value.
- In a pie chart, the whole circle represents 100 %. Each slice’s angle is proportional to the value it represents.
2. Key Points
| Feature | Bar Chart | Pie Chart |
|---|---|---|
| Data type | Discrete categories | Parts of a whole |
| Axis | One axis for categories, one for magnitude | No axes; circle only |
| Shape | Rectangular bars | Circular slices |
| Comparison | Easy to compare values directly | Harder to compare small differences |
| Accuracy | Precise (height directly proportional) | Less precise (angle perception) |
| Reading | Look at bar length | Look at slice angle or percentage |
| Common Mistakes | Mis‑scaling the axis; mixing categories | Using too many slices; not labeling |
| Typical Questions | “Which class has the highest enrolment?” | “What percentage of villages use irrigation?” |
Important Computations
| Question | Formula | Example |
|---|---|---|
| Percentage of a slice | (\text{percentage} = \frac{\text{slice value}}{\text{total}}\times100) | 25/100 × 100 % = 25 % |
| Angle of a slice | (\text{angle} = \frac{\text{slice value}}{\text{total}}\times360^\circ) | 25/100 × 360° = 90° |
| Bar length | Directly proportional to value (use a consistent scale) | If 1 cm = 10 units, a bar of 30 units → 3 cm |
3. Worked Example
Problem
A village has 120 households. The following data shows the number of households using different water sources:
| Water Source | Households |
|---|---|
| Borewell | 48 |
| Well | 30 |
| Municipal tap | 20 |
| Others | 22 |
(a) Draw a bar chart.
(b) Draw a pie chart and state the percentage of households using borewells.
Solution
(a) Bar Chart
-
Set up axes
- X‑axis: Water sources (4 categories).
- Y‑axis: Number of households (0–50, scale 10 units = 1 cm).
-
Draw bars
- Borewell: 48 → 4.8 cm.
- Well: 30 → 3.0 cm.
- Municipal tap: 20 → 2.0 cm.
- Others: 22 → 2.2 cm.
-
Label each bar with its value and category.
(b) Pie Chart
- Compute total = 120.
- Percentage for borewell
[ \frac{48}{120}\times100 = 40% ] - Angle for borewell
[ \frac{48}{120}\times360^\circ = 144^\circ ] - Draw a circle.
- Start at the top; mark 144° clockwise for borewell.
- Continue with other slices (Well: 90°, Municipal tap: 60°, Others: 66°).
- Label each slice with its source and percentage (e.g., “Borewell – 40 %”).
4. Quick Revision Summary
| Topic | Remember |
|---|---|
| Bar Chart | Use for discrete categories; compare easily; scale matters. |
| Pie Chart | Use for parts of a whole; show percentages; avoid too many slices. |
| Scale & Units | Keep consistent; label axes and bars clearly. |
| Angle–Percentage Relation | (360^\circ) ↔ 100 %; 1° = (100/360) % ≈ 0.278 %. |
| Common Pitfalls | Mis‑scaling, missing labels, cutting slices too close together. |
| Answering Questions | Convert figures to percentages or angles as required; double‑check calculations. |
Tip: When in doubt, sketch the chart first, then fill in the numbers. This visual layout often reveals errors before you start solving.
Happy studying!