Time & Work – Advanced Study Notes
Program: Kerala Forest Guard
Subject: Quantitative Aptitude
Level: MIT‑level (first‑principles, rigorous, edge‑case awareness)
These notes walk you from the very definition of “work” to sophisticated modelling techniques. They are aimed at the most ambitious aspirants who wish to master the subject beyond the standard exam pattern.
1. Introduction
In quantitative aptitude, Time & Work problems ask you to relate three quantities:
- W – total amount of work (in “work units”)
- R – rate of work (units per hour)
- T – time taken (hours)
The canonical relation is
[ \boxed{W = R \cdot T}\qquad\text{(1)} ]
All the classic problems are derived from this simple equation, but reality is rarely that clean.
Below we build a robust framework that can handle:
- Variable rates
- Piecewise or stochastic work capacities
- Overlaps and dependencies
- Optimization under constraints
2. Fundamental Principles
2.1 Work as a Quantitative Entity
- Definition: Work (W) is a scalar that accumulates linearly with time when a constant rate is maintained.
- Units: Choose a convenient unit (e.g., person‑hours).
- Additivity: If two workers finish (W_1) and (W_2) respectively, the combined work is (W_1+W_2).
2.2 Constant‑Rate Assumption
The standard formula (1) assumes (R) is constant over the period (T).
- Justification: For a single worker or machine that operates in a steady regime, the rate is indeed constant.
- Limitations: In practice, fatigue, learning curves, or resource constraints can make (R) time‑dependent.
2.3 Time–Rate–Work Relationship
Rearranging (1):
| Scenario | Formula | Interpretation |
|---|---|---|
| Find (T) | (T = \frac{W}{R}) | Time needed at rate (R). |
| Find (R) | (R = \frac{W}{T}) | Rate required to finish in (T). |
| Find (W) | (W = R \cdot T) | Work completed in (T) at rate (R). |
These are the building blocks for all standard problems.
3. Mathematical Modelling
3.1 Linear Models
When multiple workers join, the total rate is the sum of individual rates:
[ R_{\text{total}} = \sum_{i=1}^{n} R_i \tag{2} ]
If worker (i) works for (t_i) hours, the work they contribute is (R_i t_i).
Common pitfall: Forgetting that each worker’s time may differ.
3.2 Differential Equations (Variable Rates)
If the rate changes with time, (R(t)), the work done is
[ W = \int_{0}^{T} R(t),dt \tag{3} ]
Example: A machine that degrades linearly: (R(t)=R_0(1-\alpha t)).
Then
[ W = R_0 \left[T - \frac{\alpha T^2}{2}\right] ]
3.3 Systems of Linear Equations
Many problems reduce to solving a system.
Example:
Worker A and B together finish a task in 12 h. A alone in 18 h, B alone in 24 h.
Let (R_A, R_B) be their rates.
We have:
[
\begin{cases}
R_A + R_B = \frac{W}{12} \
R_A = \frac{W}{18} \
R_B = \frac{W}{24}
\end{cases}
]
Solving yields (R_A = \frac{W}{18}, R_B = \frac{W}{24}).
Check consistency: ( \