Time–Speed–Distance (TSD) – Study Notes
(For Uttarakhand Patwari / Lekhpal Quantitative Aptitude)
1. Simple Explanation
The Time–Speed–Distance (TSD) relationship is a basic formula that links the three key variables when an object moves with a constant speed.
[ \boxed{\text{Distance} = \text{Speed} \times \text{Time}} ]
- Distance (D) – How far the object travels (km, m, miles, etc.).
- Speed (S) – Rate of travel (km/h, m/s, mph, etc.).
- Time (T) – Duration of the travel (hours, minutes, seconds, etc.).
When any two of the three values are known, the third can be found by rearranging the formula:
| Given | Find | Formula |
|---|---|---|
| Speed & Time | Distance | (D = S \times T) |
| Speed & Distance | Time | (T = \dfrac{D}{S}) |
| Distance & Time | Speed | (S = \dfrac{D}{T}) |
2. Key Points to Remember
| Point | Detail |
|---|---|
| Units must be consistent | Convert all values to the same base units before applying the formula. |
| Speed can be expressed as average speed | If the speed varies, use the average speed to find the net distance. |
| Time in hours | Often given in minutes or seconds; convert to hours ( (1\text{ hr} = 60\text{ min}) ). |
| Speed in km/h | For Indian road problems, speeds are usually given in km/h. |
| Distance in km | For land travel, distance is often in kilometres. |
| Check the problem for extra conditions | e.g., “after 30 min the speed doubled” – split the trip into segments. |
| Use a calculator for large numbers | Avoid arithmetic errors. |
| Units for speed | If distance is in miles and time in hours, speed will be in mph. |
| Common pitfalls | Forgetting to convert minutes to hours, or mixing up speed and velocity (direction not needed in TSD). |
3. Worked Example
Problem:
A patwari travels from Village A to Village B, a distance of 120 km.
First part of the journey is covered at 30 km/h, and after reaching a midway station, the speed is increased to 50 km/h.
Find the total time taken for the journey.
Step‑by‑step Solution
-
Determine the distance of each segment.
- The total distance is 120 km.
- Midway station is at half the distance:
[ \text{Segment 1} = \frac{120}{2} = 60 \text{ km} ] [ \text{Segment 2} = 60 \text{ km} ]
-
Find time for each segment using (T = D/S).
-
Segment 1 (30 km/h):
[ T_1 = \frac{60}{30} = 2 \text{ hours} ] -
Segment 2 (50 km/h):
[ T_2 = \frac{60}{50} = 1.2 \text{ hours} ]
-
-
Add the times to get total time.
[ T_{\text{total}} = T_1 + T_2 = 2 + 1.2 = 3.2 \text{ hours} ] -
Convert to hours and minutes if desired.
[ 0.2 \text{ hour} = 0.2 \times 60 \text{ min} = 12 \text{ min} ] [ \boxed{3 \text{ h } 12 \text{ min}} ]
Answer: The patwari takes 3 hours 12 minutes to travel from Village A to Village B.
4. Quick Revision Summary
| Concept | Formula | How to Use |
|---|---|---|
| Distance | (D = S \times T) | Multiply speed by time. |
| Time | (T = \dfrac{D}{S}) | Divide distance by speed. |
| Speed | (S = \dfrac{D}{T}) | Divide distance by time. |
| Unit Check | All values in consistent units | Convert minutes ↔ hours, km ↔ m if needed. |
| Segment Problems | Compute each segment separately, then sum times | Useful when speed changes. |
- Always convert minutes to hours before plugging into the formula.
- Check for “average speed” when speeds vary.
- Use a calculator for fractions or decimal conversions.
Practice Tip:
Solve at least 5 problems covering each scenario (constant speed, varying speed, mixed units) to cement the concept. Happy studying!