Time-speed-distance

Speed & Geometry · free study notes · Updated

Time–Speed–Distance (TSD) – Quick Study Notes

For the Jammu & Kashmir TET – Quantitative Aptitude


1. Simple Explanation

The Time–Speed–Distance relation is a basic kinematic formula that links the three fundamental variables of motion:

[ \boxed{\text{Distance} = \text{Speed} \times \text{Time}} ]

  • Distance (D) – total ground covered (km, meters, miles, etc.)
  • Speed (S) – rate of motion (km/h, m/s, mph)
  • Time (T) – duration of travel (h, min, s)

All three variables are inter‑dependent; knowing any two allows you to compute the third.


2. Key Points to Remember

Concept What to Note Typical Test Trick
Units Keep units consistent – e.g., km/h × h = km. Convert minutes to hours (1 h = 60 min) or hours to minutes (1 h = 60 min). Convert before calculation.
Speed Rate of change of distance. Often given as average speed. If a journey is split into two parts with different speeds, use weighted average.
Distance Total ground covered, not displacement. “Total distance” when the path changes direction.
Time Duration of travel, may include stops. If stops are given, subtract them from total time.
Multiple‑Segment Journeys Sum distances of each segment; ensure speeds and times are for same segment. Compute segment distances separately, then add.
Average Speed for a Round Trip (\displaystyle \bar S = \frac{2,S_1S_2}{S_1+S_2}) if return speed (S_2). Useful when distances are equal in both directions.
Speed vs. Rate of Change Speed is a rate (distance/time). “Rate of change” is a synonym.
Common Pitfalls 1. Mixing units (e.g., km with minutes). 2. Using “speed” as a distance. 3. Forgetting to convert time units. Double‑check units after each step.

3. Worked Example

Problem
A train travels from City A to City B, a distance of 240 km.

  • It moves at 60 km/h for the first 2 hours.
  • Then it speeds up to 80 km/h for the remainder of the journey.

Find the total time taken.

Solution

  1. Distance covered in the first 2 h
    [ D_1 = S_1 \times T_1 = 60 \text{ km/h} \times 2 \text{ h} = 120 \text{ km} ]

  2. Remaining distance
    [ D_{\text{rem}} = D_{\text{total}} - D_1 = 240 \text{ km} - 120 \text{ km} = 120 \text{ km} ]

  3. Time for remaining part
    [ T_{\text{rem}} = \frac{D_{\text{rem}}}{S_2} = \frac{120 \text{ km}}{80 \text{ km/h}} = 1.5 \text{ h} ]

  4. Total time
    [ T_{\text{total}} = T_1 + T_{\text{rem}} = 2 \text{ h} + 1.5 \text{ h} = 3.5 \text{ h} ]

Answer: The train takes 3.5 hours to travel from City A to City B.


4. Quick Revision Summary

What Formula Example Use
Distance (D = S \times T) Find distance if speed & time known
Speed (S = \dfrac{D}{T}) Find speed from total distance & time
Time (T = \dfrac{D}{S}) Find time from distance & speed
Average speed for round trip (\bar S = \dfrac{2S_1S_2}{S_1+S_2}) Equal distances in both directions
Unit check Convert all to same units before calculation 3 h 30 min → 3.5 h
  • Always convert units first.
  • Check logic: if you get a negative time or distance, you’ve mixed up units or directions.
  • Practice: Solve 3–4 problems a day using the formulas above to cement the concepts.

Good luck with your J&K TET preparation!

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.