BAMS (Ayurveda) /Physics

Current electricity

Electrodynamics · free study notes

Current Electricity – Study Notes

(For IIT‑JEE / Competitive Exams)


1. Overview

Concept Symbol Units Definition
Electric current (I) A (Ampere) Flow of charge per unit time
Charge moved (Q) C (Coulomb) (Q = It)
Voltage (potential difference) (V) V (Volt) Energy per unit charge
Resistance (R) Ω (Ohm) (R = \frac{V}{I})
Conductance (G) S (Siemens) (G = \frac{1}{R})
Power (P) W (Watt) (P = VI = I^2R = \frac{V^2}{R})

2. Microscopic View

  • Drift velocity (v_d) of charge carriers in a conductor:
    [ I = n q A v_d ] where (n) = number density of carriers, (q) = charge, (A) = cross‑section.

  • Mean free path & mobility (\mu):
    [ v_d = \mu E ] where (E) is electric field.

  • Resistivity (\rho) relates to conductivity (\sigma):
    [ R = \rho \frac{L}{A},\qquad \sigma = \frac{1}{\rho} ]


3. Ohm’s Law – Derivation & Limits

  • Macroscopic form: (V = IR).

  • Derivation from drift velocity:
    [ V = E L = (n q \rho v_d) L = \frac{I\rho L}{A} ] Hence (R = \rho L/A).

  • When Ohm’s Law fails

    • Non‑Ohmic conductors: semiconductors, diodes, vacuum tubes, gases at high field.
    • Temperature dependence: (\rho(T) = \rho_0[1+\alpha(T-T_0)]).
    • High‑frequency / AC: skin effect, displacement current.

4. Kirchhoff’s Laws – Systematic Approach

Law Statement Mathematical Form
Current law (KCL) Sum of currents entering a node = 0 (\sum I_{\text{in}} = \sum I_{\text{out}})
Voltage law (KVL) Sum of EMFs and voltage drops = 0 (\sum V_{\text{emf}} = \sum I R)

Application steps

  1. Assign current directions (assume, correct later).
  2. Write KCL at each node.
  3. Write KVL for independent loops.
  4. Solve simultaneous equations (often linear).
  5. If circuit is large, use nodal or mesh analysis.

5. Power Dissipation & Efficiency

  • Instantaneous power in a resistor: (p(t)=i(t)v(t)).
  • Average power for DC: (P = I V).
  • Efficiency of a circuit element: (\eta = \frac{P_{\text{useful}}}{P_{\text{input}}}).

Tricky point: In AC circuits, use RMS values: (P_{\text{avg}} = I_{\text{rms}} V_{\text{rms}} \cos\phi).


6. Energy Stored in Magnetic Field – Inductors

  • Inductance (L): (V_L = L\frac{di}{dt}).
  • Energy stored:
    [ W = \frac{1}{2} L i^2 ]
  • Self‑inductance of a solenoid: (L = \mu_0 n^2 A l).
  • Mutual inductance: (V_2 = M \frac{di_1}{dt}).
  • Practical tip: In series circuits, total inductance adds; in parallel, use reciprocal.

7. Capacitance & Energy Storage

  • Capacitance (C): (Q = CV).
  • Energy stored:
    [ W = \frac{1}{2} C V^2 ]
  • Parallel‑plate: (C=\epsilon_0\frac{A}{d}).
  • Series: (\frac{1}{C_{\text{tot}}}=\sum\frac{1}{C_i}).
  • Important: In AC, use complex impedance (Z_C = \frac{1}{j\omega C}).

8. Thermal Effects – Joule Heating

  • Joule’s law: (Q_{\text{heat}} = I^2 R t).
  • Temperature rise in a resistor:
    [ \Delta T = \frac{I^2 R t}{C_{\text{th}}} ] where (C_{\text{th}}) is thermal capacity of surrounding medium.

Hard point: In high‑power electronics, thermal runaway due to increasing (R(T)) can lead to failure.


9. Quantum View – Energy Bands

  • Conductors: Fermi level inside band.
  • Semiconductors: Small band gap; (n)-type, (p)-type doping.
  • Temperature dependence: (\sigma \propto e^{-\frac{E_g}{2kT}}).
  • Current–voltage characteristics:
    • Diode: (I = I_s(e^{eV/kT}-1)).
    • Bipolar junction: (I \propto (V^2-1)).

10. Common Tricky Points for JEE

  1. Sign convention in KVL – Always start from the assumed current direction; reverse sign if assumption wrong.
  2. RMS vs Arithmetic Mean – For sinusoidal currents, (I_{\text{rms}} = I_{\text{peak}}/\sqrt{2}).
  3. Parallel resistors – Use reciprocal formula; easy to forget.
  4. Temperature coefficient – Negative for metals, positive for semiconductors.
  5. Skin depth – (\delta = \sqrt{\frac{2

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.