B.Sc. Biology /Core Science

Lab safety

Laboratory & Practicals · free study notes · Updated

Core Science – Lab Safety

Program: B.Sc. Biology
Duration: 1‑2 hours (lecture + practical)


1. Simple Explanation

Lab safety is a set of rules and practices that protect you, your colleagues, and the environment from harm while working with chemicals, biological materials, and equipment. Think of it as a “safety net” that keeps accidents, infections, and contamination under control.


2. Key Points

Category What to Watch For Why It Matters
Personal Protective Equipment (PPE) <ul><li>Lab coat or apron</li><li>Safety goggles / face shield</li><li>Gloves (rubber, nitrile, latex)</li><li>Closed‑toe shoes, hair tied back</li></ul> Protects skin, eyes, and body from splashes, fumes, and contamination.
Chemical Safety <ul><li>Read labels & SDS (Safety Data Sheet)</li><li>Know hazards (flammable, corrosive, toxic)</li><li>Use fume hoods for volatile substances</li></ul> Prevents burns, inhalation injuries, and accidental ingestion.
Biological Safety <ul><li>Use biosafety cabinets (BSCC) for pathogens</li><li>Follow aseptic technique</li><li>Properly sterilize instruments (autoclave, UV)</li></ul> Stops spread of microorganisms that could infect you or the environment.
Equipment & Facility Safety <ul><li>Check equipment before use (e.g., centrifuge balance)</li><li>Keep walkways clear</li><li>Know emergency exits & fire extinguishers</li></ul> Reduces risk of mechanical accidents, fires, or spills.
Spill Response <ul><li>Contain with spill kit (absorbent pads, neutralizing agents)</li><li>Notify supervisor</li><li>Clean with proper PPE</li></ul> Minimizes contact time and prevents secondary contamination.
Waste Management <ul><li>Segregate waste (chemical, biohazard, sharps)</li><li>Use labelled containers</li><li>Follow local regulations for disposal</li></ul> Avoids environmental harm and legal penalties.
Documentation & Reporting <ul><li>Record incidents in lab log</li><li>Report injuries immediately</li></ul> Enables tracking of hazards and continuous improvement.

3. Worked Example

Scenario: You are preparing a 0.1 M phosphate buffer (pH 7.0) for a protein assay.

Step Action Safety Measure
1 Gather reagents: Na₂HPO₄, NaH₂PO₄, distilled water. Wear gloves, goggles, lab coat.
2 Check SDS for each chemical. Identify corrosive properties.
3 Measure 100 mL water in a beaker. Use a clean, dry beaker.
4 Dissolve 3.2 g Na₂HPO₄ in water. Stir gently; avoid splashing.
5 Add 2.3 g NaH₂PO₄. Use a sterile spoon.
6 Adjust pH to 7.0 with 1 M NaOH. Perform in a fume hood; add dropwise.
7 Filter the solution. Use a clean filter; wear gloves.
8 Label the bottle (Buffer, 0.1 M, pH 7.0, date). Prevent misidentification.
9 Dispose of any leftover solids. Place in labeled chemical waste container.
10 Clean work area. Rinse beaker with water; wipe surfaces.

What could go wrong?

  • NaOH splash: Burns skin → use goggles, splash shield.
  • Mislabeling: Using wrong buffer → assay error.
  • Spill: Chemical contact with skin → immediate rinse, medical attention.

4. Quick Revision Summary

  • PPE first: coat, goggles, gloves, closed shoes.
  • Read labels & SDS before handling chemicals.
  • Use fume hood for volatile or toxic substances.
  • Aseptic technique for all biological work.
  • Check equipment (balance, centrifuge) before use.
  • Spill kit ready; know the protocol.
  • Separate waste into chemical, biohazard, sharps.
  • Report any incidents immediately.
  • Keep the lab tidy – clear walkways, no clutter.

Remember: Safety isn’t a bureaucratic hurdle; it’s the foundation that lets you explore biology responsibly and sustainably.

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.