Chandigarh PSC /Quantitative Aptitude

Percentages

Arithmetic · free study notes

Percentages – Advanced University‑Level Study Notes

(Prepared for the Chandigarh PSC – Quantitative Aptitude Section)


1. Overview

A percentage is a way of expressing a ratio or a fraction with respect to 100.
If a quantity (q) is expressed as a percentage of another quantity (Q), we write

[ q;\text{is};P% \text{ of } Q ]

where

[ P = \frac{q}{Q}\times 100 \qquad (1) ]

The symbol (%) is simply a shorthand for “per‑hundred”.
In mathematical terms, percentages are scaled ratios:

[ P% = P\times\frac{1}{100} = \frac{P}{100};. ]


2. Fundamental Properties

Property Statement Proof (first principles)
Basic conversion (P% = \dfrac{P}{100}) By definition (1), (q = P \times Q/100).
Multiplication rule (P%\text{ of } Q = \dfrac{PQ}{100}) Substitute (P/100) for the percent: (\frac{P}{100}\cdot Q = \frac{PQ}{100}).
Additive rule ((P+Q)% \text{ of } R = \frac{(P+Q)R}{100}) Linear because (\frac{P+Q}{100}R = \frac{PR}{100} + \frac{QR}{100}).
Scaling If (Q) is multiplied by a factor (k), the same percentage of the new value is (k) times the old one. (\frac{P}{100}\cdot(kQ)=k\frac{PQ}{100}).
Percent increase New value (= \text{old} \times \bigl(1 + \frac{P}{100}\bigr)) If the value increases by (P%): ( \text{new} = \text{old} + \text{old}\frac{P}{100} = \text{old}\bigl(1+\frac{P}{100}\bigr)).
Percent decrease New value (= \text{old} \times \bigl(1 - \frac{P}{100}\bigr)) Same reasoning as above with subtraction.
Compound change Successive changes (P_1%, P_2%,\dots,P_n%) give overall factor (\prod_{i=1}^n \bigl(1+\frac{P_i}{100}\bigr)). Multiply the successive factors.
Inverse percent If (x) is (P%) of (y), then (y) is (\dfrac{100}{P}%) of (x). From (x = P y/100 \Rightarrow y = 100x/P).

3. Advanced Topics

3.1 Percent Change vs. Elasticity

  • Percent change in a variable (X) caused by a small change (\Delta X) is (\frac{\Delta X}{X}\times 100).
  • Elasticity (E_{Y,X}) of a variable (Y) with respect to (X) is the ratio of percent change in (Y) to percent change in (X):

[ E_{Y,X} = \frac{\frac{\Delta Y}{Y}}{\frac{\Delta X}{X}} = \frac{X}{Y}\cdot\frac{\Delta Y}{\Delta X};. ]

As (\Delta X \to 0), (E_{Y,X}) becomes the derivative (E_{Y,X} = \frac{dY}{dX}\cdot\frac{X}{Y}).

3.2 Percent Error and Relative Error

Given a true value (T) and an observed value (O):

[ \text{Percent Error} = \left|\frac{O - T}{T}\right|\times 100%. ]

This is a relative error expressed in percent. It is invariant under scaling: if both (O) and (T) are multiplied by the same non‑zero factor, the percent error remains unchanged.

3.3 Percentages in Growth Models

  • Exponential growth: (N(t) = N_0 e^{rt}). The percent growth over (\Delta t) is ((e^{r\Delta t} - 1)\times 100%).
  • Logistic growth: (N(t) = \frac{K}{1 + Ae^{-rt}}). The percent change is more involved but can be linearized for small (\Delta t).

These are useful for interpreting compound percentages over continuous time.

3.4 Edge Cases & Special Situations

Situation Interpretation Formula
**(

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.