BITSAT /Physics

Simple Harmonic Motion (SHM)

Thermodynamics & Waves · free study notes

Simple Harmonic Motion (SHM) – Quick Study Notes

(For BITSAT Physics – Beginner Level)


1. What is SHM?

  • Simple Harmonic Motion is a back‑and‑forth motion that repeats itself exactly.
  • Think of a swing that you let go of: it goes forward, then backward, then forward again.
  • The motion is “simple” because the restoring force that pulls it back is directly proportional to how far it is from the middle (rest) position.

2. Everyday Analogy

Situation Resting point Pull‑back force Result
Spring The unstretched length Spring pushes or pulls back (Hooke’s law) Oscillates up & down
Pendulum Straight down Gravity pulls it toward the bottom Swinging side‑to‑side
Tennis ball on a rubber band Band’s relaxed length Band pulls ball back Ball bounces

In all cases, the farther you pull, the stronger the push back.


3. Key Quantities

Symbol Meaning Everyday Unit
x Displacement from the middle meters (m)
A Maximum displacement (amplitude) meters (m)
T Time for one full back‑and‑forth cycle seconds (s)
f How many cycles per second hertz (Hz)
ω “Speed” of the motion in radians (but we’ll keep it simple) rad/s
v Speed at a point m/s
a Acceleration at a point m/s²

4. The Basic Equation

Position varies like a cosine wave:

x(t) = A · cos( 2π t / T + φ )
  • t = time
  • φ = phase (where the motion starts) – think of a starting point on the swing.
  • Short sentence: “The position is a cosine of time.”

5. The Three Pillars

Pillar What it tells you Quick Formula
Amplitude (A) How far it swings A (given)
Period (T) How long one cycle takes T = 2π√(m/k) for a spring
Frequency (f) Cycles per second f = 1/T

Remember:
Period = time for one round
Frequency = how many rounds per second


6. Energy in SHM

  • Potential Energy (PE) is stored when the object is stretched/compressed.
    • PE ∝ square of displacement (x²).
  • Kinetic Energy (KE) is stored when the object is moving.
    • KE ∝ square of speed (v²).
  • Total energy stays the same (no friction).
    • When x is max, v is zero → all energy is PE.
    • When x is zero, v is max → all energy is KE.

7. Tiny Example – Mass on a Spring

Given Value
Mass m 0.5 kg
Spring constant k 20 N/m
Amplitude A 0.1 m

1. Period

T = 2π√(m/k)
  = 2π√(0.5 / 20)
  ≈ 2π√(0.025)
  ≈ 2π·0.158
  ≈ 0.99 s

2. Frequency

f = 1/T ≈ 1 / 0.99 ≈ 1.01 Hz

3. Maximum Speed (v_max)

v_max = 2πA / T
      = 2π·0.1 / 0.99
      ≈ 0.63 m/s

4. Maximum Energy (E_max)

E_max = ½ k A²
      = 0.5·20·(0.1)²
      = 0.5·20·0.01
      = 0.1 J

8. Quick Graphs (Sketch)

  1. Position vs. Time
    • Cosine wave, peaks at ±A.
  2. Velocity vs. Time
    • Sine wave, peaks at ±v_max.
  3. Energy vs. Time
    • Two curves: PE (cos²) and KE (sin²) that add up to a flat line at E_max.

(You can draw these on a sheet to visualize the cycle.)


9. Summary Checklist

  • Identify the resting point.
  • Measure amplitude (A).
  • Find period (T) or frequency (f).
  • Use T = 2π√(m/k) for a spring, T = 2L/g for a simple pendulum (

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.