Electric Potential, Capacitors & Dielectrics
Study notes for BITSAT – Physics
1. Electric Potential
| Term | Simple idea | Everyday analogy |
|---|---|---|
| Electric potential (V) | The “push” an electric charge gets when it moves from one point to another. | Water pressure that pushes water up a pipe. |
| Potential difference (ΔV) | How much push changes between two points. | Difference in height between two places on a hill. |
| Unit | Volt (V) | One joule of energy per coulomb of charge. |
| Work needed to move a charge | W = q * ΔV |
Moving a ball up a hill takes work equal to weight × height. |
Tiny Example
A 5‑C charge moves from point A to point B and needs 10 J of work.
ΔV = W / q = 10 J / 5 C = 2 V.
So the potential difference is 2 V.
2. Potential of a Point Charge
- A charge
qcreates a field around it. - The potential a distance
raway is
V = k * q / r, wherek ≈ 8.99×10⁹ N·m²/C². - The closer you are, the higher the potential.
Tiny Example
Charge q = 2 µC at a distance r = 0.5 m.
V = 8.99×10⁹ * 2×10⁻⁶ / 0.5 ≈ 35.96 kV.
3. Capacitors – Storing Charge
| Concept | Simple idea | Analogy |
|---|---|---|
| Capacitor | Two metal plates that can hold opposite charges. | Two buckets that can hold water of opposite polarity. |
| Capacitance (C) | How much charge a capacitor can store per volt. | Size of the bucket – bigger bucket holds more water. |
| Formula for parallel‑plate capacitor | C = ε₀ * A / d |
ε₀ is the “air” value, A is plate area, d is distance. |
| Energy stored | U = ½ * C * V² |
Energy in a compressed spring. |
Tiny Example
Area A = 0.02 m², distance d = 0.01 m.
C = 8.85×10⁻¹² * 0.02 / 0.01 ≈ 1.77×10⁻¹² F (1.77 pF).
If V = 10 V, stored energy U = ½ * 1.77×10⁻¹² * 10² ≈ 8.85×10⁻¹² J.
4. Connecting Capacitors
| Connection | Resulting Capacitance | Short rule |
|---|---|---|
| Series | 1/C_total = 1/C₁ + 1/C₂ + … |
Capacitance goes down. |
| Parallel | C_total = C₁ + C₂ + … |
Capacitance goes up. |
Why?
In series, the same charge must share the plates, so the effective storage is smaller.
In parallel, plates add more area, so more charge can be stored.
5. Dielectrics – “Insulating” Materials
| Idea | Simple explanation | Analogy |
|---|---|---|
| Dielectric | A material put between the plates that lets the electric field stay but reduces the field inside. | A sponge that softens a hammer’s strike. |
| Effect on Capacitance | C_dielectric = κ * C_air |
The sponge makes the bucket hold more water (κ > 1). |
| Dielectric constant (κ) | How much the material boosts capacitance. | “Softness” of the sponge. |
| Energy with dielectric | U_dielectric = ½ * C_dielectric * V² |
Energy stored is larger if κ is larger. |
| Breakdown | If the field is too strong, the dielectric becomes conductive. | Water boiling when heated too much. |
Tiny Example
Same capacitor as above, but we insert a dielectric with κ = 4.
New capacitance C = 4 * 1.77 pF = 7.08 pF.
If applied voltage remains 10 V, stored energy U = ½ * 7.08×10⁻¹² * 10² ≈ 3.54×10⁻¹¹ J – four times the original.
6. Quick Formula Sheet
| Symbol | What it means | Formula |
|---|---|---|
V |
Potential difference | V = W / q |
ΔV |