BITSAT /Physics

Electrical Instruments, Heating Effects

Electrostatics & Current Electricity · free study notes · Updated

Electrical Instruments & Heating Effects

Physics – BITSAT


1. Simple Explanation

  • Electrical instruments are devices that convert electrical energy into a measurable physical quantity (light, sound, mechanical motion, etc.).
  • Heating effect (Joule effect) is the conversion of electric energy into heat when an electric current passes through a conductor.
  • In many instruments (thermocouples, ammeters, voltmeters, resistive sensors) the heating effect is either the working principle or a side‑effect that must be controlled.

2. Key Points

Concept Key Points
Joule’s Law ( Q = I^{2} R t ) – heat (Q) produced by current (I) in resistance (R) over time (t).
Resistive Heating Power dissipated (P = I^{2}R = V^{2}/R = VI).
Thermal Equilibrium In steady state, heat generated = heat lost to surroundings.
Temperature Coefficient of Resistance (TCR) ( R = R_{0}[1 + \alpha (T - T_{0})] ). Affects instrument accuracy.
Thermocouple Generates EMF due to Seebeck effect; independent of heating (unless significant current flows).
Thermistors Resistance varies strongly with temperature; used in temperature sensors.
Bimetallic Strips Differential expansion of two metals causes bending → used in thermostats.
Electro‑thermal Transducers Convert electrical energy to mechanical motion via heating (e.g., bimetallic strip actuators).
Heat Loss Mechanisms Conduction, convection, radiation; all must be considered in instrument design.
Power Rating Instruments must be rated to handle maximum expected heat without damage.
Calibration Must account for self‑heating; often performed with zero‑current or low‑current conditions.

3. Worked Example

Problem
A 10 Ω resistor is connected to a 12 V supply.
(a) Calculate the heat produced in 5 min.
(b) If the resistor is allowed to cool to 20 °C after 5 min, what is the average temperature rise during the heating period? (Assume the resistor is a perfect cylinder with mass (m=0.05,\text{kg}), specific heat (c=900,\text{J·kg}^{-1}\text{·K}^{-1}), and its initial temperature is 20 °C.)

Solution

(a) Heat produced

( I = \dfrac{V}{R} = \dfrac{12}{10} = 1.2 ,\text{A} )

( Q = I^{2} R t = (1.2)^{2} \times 10 \times 300 , \text{s} )

( Q = 1.44 \times 10 \times 300 = 4320 ,\text{J} )

(b) Temperature rise

Heat absorbed by resistor: (Q = m c \Delta T)

( \Delta T = \dfrac{Q}{m c} = \dfrac{4320}{0.05 \times 900} = \dfrac{4320}{45} = 96 ,\text{K} )

Average temperature rise over 5 min:

Since heating is uniform, the average rise is ( \dfrac{96}{2} = 48 ,\text{K} ) (≈ 48 °C).
Thus, the resistor’s mean temperature during the 5‑min interval is 20 °C + 48 °C ≈ 68 °C.


4. Quick Revision Summary

  • Joule’s Law: (Q = I^{2} R t); power (P = I^{2} R).
  • Heat loss: conduction, convection, radiation → must be balanced for steady state.
  • Temperature effects: TCR alters resistance → affects readings.
  • Thermal sensors: thermocouples (Seebeck), thermistors (variable R), bimetallic strips (mechanical).
  • Self‑heating: always consider in calibration and error analysis.
  • Design tip: use high‑resistance, low‑current paths for measurement to minimise self‑heating.

Remember: In BITSAT, questions often mix electrical calculations with thermal concepts. Keep Joule’s Law and TCR formulas handy, and practice conversion between power, heat, and temperature changes.

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.