VITEEE /Physics

Thermal Properties of Matter

Heat & Thermodynamics · free study notes

Thermal Properties of Matter

Advanced University‑Level Notes (MIT‑style)


1. Introduction

Thermal properties describe how matter exchanges and stores energy in the form of heat. They are governed by the microscopic degrees of freedom (translational, rotational, vibrational, electronic) and the statistical distribution of those degrees of freedom.

Key concepts:

Concept Symbol Units Definition
Temperature (T) K Thermodynamic variable proportional to average kinetic energy of particles
Heat capacity (C) J K(^{-1}) Energy required to raise the temperature of a system by one kelvin
Thermal conductivity (\kappa) W m(^{-1}) K(^{-1}) Rate of heat flow per unit temperature gradient
Specific heat (at constant (P)) (c_p) J kg(^{-1}) K(^{-1}) (c_p = \frac{C}{m}) at constant pressure
Specific heat (at constant (V)) (c_v) J kg(^{-1}) K(^{-1}) (c_v = \frac{C}{m}) at constant volume
Latent heat (L) J kg(^{-1}) Energy required to change phase at constant (T,P)

2. Temperature – From Microscopic Kinetics to Thermodynamics

2.1 Kinetic Theory of Gases

For an ideal monatomic gas, the average translational kinetic energy per particle is

[ \langle E_{\text{kin}}\rangle = \frac{3}{2}k_B T ]

where (k_B) is Boltzmann’s constant. The derivation uses the Maxwell–Boltzmann velocity distribution; integrating (v^2) over the distribution yields the factor (3/2).

Edge case: For a diatomic gas, rotational degrees contribute (\frac{2}{2}k_B T) at room temperature (rotational modes are excited), while vibrational modes contribute only at high (T) due to quantum energy gaps.

2.2 Thermodynamic Temperature

The Carnot efficiency

[ \eta_{\text{Carnot}} = 1 - \frac{T_c}{T_h} ]

establishes temperature as a measure of the ability to do work. The zeroth, first, and second laws together give the definition of absolute temperature scale.


3. Heat Capacity and Specific Heat

3.1 Definitions

For a system undergoing a quasi‑static process:

[ C_X = \frac{\delta Q}{dT}\Bigg|_X ]

where (X) is the controlled variable (e.g., pressure (P) or volume (V)).

Note: (C_P) is larger than (C_V) because work (PdV) is done during heating at constant pressure.

3.2 Quantum Harmonic Oscillator Model

For a solid, each atom behaves like a 3‑D quantum harmonic oscillator. The energy levels are

[ E_n = \hbar \omega \left( n + \frac{1}{2} \right) ]

The average energy per oscillator:

[ \langle E \rangle = \frac{\hbar \omega}{2} + \frac{\hbar \omega}{e^{\hbar \omega/k_B T} - 1} ]

From this, the molar heat capacity:

[ C_V = 3R \left[ \frac{x^2 e^x}{(e^x-1)^2} \right], \quad x = \frac{\hbar \omega}{k_B T} ]

  • Low‑T limit ((T \ll \theta_D), Debye temperature): (C_V \propto T^3) (Debye law).
  • High‑T limit ((T \gg \theta_D)): (C_V \to 3R) (Dulong–Petit law).

3.3 Edge Cases

System (C_V) (Low (T)) (C_V) (High (T)) Notes
Ideal gas ( \frac{3}{2}R) ( \frac{3}{2}R) independent of (T)
Monoatomic solid ( \propto T^3) (3R) Debye
Diatomic gas ( \frac{5}{2}R) ( \frac{5}{2}R) adds rotational modes
Metal ( \gamma T ) (electronic) + Debye term (3R) electronic contribution linear in (T)

4. Thermal Conductivity

Heat transport in a material is described by Fourier’s law:

[ \mathbf{q} = -\kappa \nabla T ]

where (\mathbf{q}) is the heat flux vector.

4.1 Microscopic Derivation (Phonon Transport)

In insulators, phonons (quantized lattice vibrations) carry heat. The thermal conductivity can be expressed as:

[ \kappa = \frac{1}{3} C_v v_s \ell ]

where

  • (C_v) – phonon heat capacity per volume,
  • (v_s) – average sound speed,
  • (\ell) – mean free path (determined by scattering: Umklapp, impurities, boundaries).

Edge case: At very low (T), (\ell) can exceed sample dimensions, leading to ballistic transport (phonon mean free path limited by sample size).

4.2 Electron Contribution (Metals)

For metals, electrons dominate:

[ \kappa = \frac{1}{3} v_F^2 \tau C_e ]

where (v_F) is Fermi velocity, (\tau) scattering time, (C_e = \gamma T) electronic heat capacity.

The Wiedemann–Franz law relates (\kappa) and electrical conductivity (\sigma):

[ \frac{\kappa}{\sigma T} = L_0 = \frac{\pi^2}{3}\left(\frac{k_B}{e}\right)^2 ]


5. Phase Transitions and Latent Heat

  • First‑order transitions: Discontinuous change in entropy (S) and volume (V). Latent heat (L = T \Delta S).
  • Second‑order transitions: Continuous (S), but discontinuity in heat capacity.

Critical phenomena:

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.