Simple Harmonic Motion (SHM)
Course: Physics – Manipal MET
Topic: Simple Harmonic Motion (SHM)
1. Simple Explanation
Simple Harmonic Motion is a type of periodic motion where the restoring force is directly proportional to the displacement from an equilibrium position and acts in the opposite direction. Mathematically:
[ F = -kx ]
- (F) – restoring force
- (k) – proportionality constant (spring constant, torsion constant, etc.)
- (x) – displacement from equilibrium
Because the force is always directed back towards equilibrium and proportional to the displacement, the motion is sinusoidal (sine/cosine), oscillating back and forth with a fixed period.
2. Key Points
| Concept | Details |
|---|---|
| General form of displacement | (x(t) = A \cos(\omega t + \phi)) or (x(t) = A \sin(\omega t + \phi)) |
| Angular frequency | (\omega = 2\pi f = \sqrt{\frac{k}{m}}) |
| Period | (T = \frac{2\pi}{\omega} = 2\pi \sqrt{\frac{m}{k}}) |
| Amplitude | (A) – maximum displacement from equilibrium |
| Phase constant ((\phi)) | Determines the initial position & velocity |
| Velocity | (v(t) = -A\omega \sin(\omega t + \phi)) |
| Acceleration | (a(t) = -\omega^2 A \cos(\omega t + \phi) = -\omega^2 x(t)) |
| Energy | Total mechanical energy (E = \frac{1}{2}kA^2) (constant in ideal SHM) |
| Examples | Mass–spring system, pendulum (small angles), simple LC circuit, torsion pendulum |
| Small‑angle pendulum | (\omega = \sqrt{\frac{g}{L}}) (for ( \theta \ll 1)) |
| Damping | Not part of ideal SHM; introduces exponential decay (e^{-bt/2m}) |
| Resonance | Occurs when driving frequency matches natural frequency (\omega) |
3. Worked Example
Problem:
A 0.5 kg mass is attached to a spring with spring constant (k = 200\ \text{N/m}). The mass is displaced 0.1 m from equilibrium and released from rest.
(a) Find the angular frequency (\omega), period (T), and frequency (f).
(b) Write the displacement, velocity, and acceleration as functions of time.
(c) Determine the maximum kinetic and potential energies.
(a) Natural Frequency
[ \omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{200}{0.5}} = \sqrt{400} = 20\ \text{rad/s} ]
[ T = \frac{2\pi}{\omega} = \frac{2\pi}{20} = 0.314\ \text{s} ]
[ f = \frac{1}{T} = \frac{1}{0.314} \approx 3.18\ \text{Hz} ]
(b) Motion Equations
Since released from rest at (x_0 = 0.1\ \text{m}), the phase (\phi = 0) and amplitude (A = 0.1\ \text{m}).
[ \boxed{x(t) = 0.1 \cos(20 t)} ]
[ v(t) = \frac{dx}{dt} = -0.1 \times 20 \sin(20 t) = -2 \sin(20 t)\ \text{m/s} ]
[ a(t) = \frac{dv}{dt} = -2 \times 20 \cos(20 t) = -40 \cos(20 t)\ \text{m/s}^2 ]
(c) Energies
Total mechanical energy:
[ E = \frac{1}{2}kA^2 = \frac{1}{2} \times 200 \times (0.1)^2 = 1.0\ \text{J} ]
- Maximum kinetic energy (at equilibrium, (x = 0), (v_{\max} = A\omega = 0.1 \times 20 = 2\ \text{m/s})):
[ K_{\max} = \frac{1}{2} m v_{\max}^2 = \frac{1}{2} \times 0.5 \times 2^2 = 1.0\ \text{J} ]
- Maximum potential energy (at extreme displacement, (x = \pm A), (v = 0)):
[ U_{\max} = \frac{1}{2}kA^2 = 1.0\ \text{J} ]
Both energies are equal and sum to the constant total energy (E = 1.0\ \text{J}).
4. Quick Revision Summary
| Topic | Key Equation | Typical Value |
|---|---|---|
| Restoring force | (F = -kx) | Depends on system |
| Angular frequency | (\omega = \sqrt{\frac{k}{m}}) | Example: 20 rad/s |
| Period | (T = \frac{2\pi}{\omega}) | Example: 0.314 s |
| Displacement | (x = A \cos(\omega t + \phi)) | |
| Velocity | (v = -A\omega \sin(\omega t + \phi)) | |
| Acceleration | (a = -\omega^2 x) | |
| Energy | (E = \frac{1}{2}kA^2 = \frac{1}{2}m\omega^2 A^2) | |
| Small‑angle pendulum | (\omega = \sqrt{\frac{g}{L}}) |
- Remember: In ideal SHM, energy oscillates between kinetic and potential but the total remains constant.
- Phase ((\phi)) is set by initial conditions.
- Amplitude (A) is the maximum displacement from equilibrium.
- Resonance: driving frequency matches natural frequency → large amplitude.
Use this cheat‑sheet to quickly check formulas before exams or solve textbook problems. Happy studying!