KEAM /Physics

Thermal expansion, heat transfer

Gravitation & Properties of Matter · free study notes

KEAM Physics – Thermal Expansion & Heat Transfer

(Beginner‑friendly, everyday language – no heavy jargon)


1. Thermal Expansion

1.1 What is it?

When something gets hotter, it usually gets a little bigger.

  • Why? The molecules inside start to vibrate faster and need more space.
  • Think of it as:
    • A balloon that fills up when you breathe into it.
    • A metal rail that pushes against the concrete because it wants more room.

1.2 Linear Expansion (length change)

Formula (simple version):

ΔL = α × L₀ × ΔT
  • ΔL = change in length
  • α = material’s expansion coefficient (how much it expands per degree)
  • L₀ = original length
  • ΔT = change in temperature (°C or K)

Example
A 2 m long steel ruler (α ≈ 12 × 10⁻⁶ /°C) is heated from 20 °C to 100 °C.
ΔT = 80 °C
ΔL = 12×10⁻⁶ × 2 m × 80 = 0.00192 m ≈ 2 mm
So the ruler stretches about 2 mm.

1.3 Area & Volume Expansion

  • Area grows roughly with 2 α.
  • Volume grows roughly with 3 α.
    (Think of a cube expanding in all three directions.)

2. Heat Transfer

Heat moves from hot to cold. There are three main ways:

Mechanism How it works Everyday example Key point
Conduction Direct contact – molecules bump into each other. Metal spoon getting hot in a pot. Solid objects transfer heat fastest.
Convection Fluid (liquid or gas) carries heat as it moves. Steam rising from boiling water. Requires a fluid to move.
Radiation Energy leaves as electromagnetic waves. Sun warming your skin. Works even in a vacuum.

2.1 Conduction – The “Heat‑Squeezing” Rule

Formula (simple version):

Q = k × A × (ΔT / L)
  • Q = heat transferred (J/s)
  • k = thermal conductivity (how good a conductor it is)
  • A = area of contact
  • ΔT = temperature difference
  • L = thickness of material

Tiny Example
A 0.01 m thick copper sheet (k ≈ 400 W/m·K) has one side at 100 °C and the other at 20 °C.
Heat flow Q = 400 × A × (80 / 0.01) = 3 200 × A W.
If A = 1 m², Q = 3 200 W – a lot of heat travels through copper!

2.2 Convection – “Heat‑Swimming”

Heat is carried by a fluid moving from hot to cool regions.

  • Natural Convection: Hot air rises, cold air falls.
  • Forced Convection: Fans or pumps push the fluid.

Simple rule: The faster the fluid moves, the more heat it can carry.

2.3 Radiation – “Heat‑Waves”

All objects emit tiny invisible waves that carry heat.

  • The hotter an object, the more waves it emits.
  • No medium needed – the Sun reaches Earth through space.

Stefan‑Boltzmann law (very brief):

P = εσA T⁴
  • P = power radiated
  • ε = emissivity (how good a radiator it is)
  • σ = 5.67×10⁻⁸ W/m²·K⁴
  • A = surface area
  • T = absolute temperature (K)

Tiny Example
A black‑painted metal plate (ε ≈ 0.95) of 1 m² at 300 K radiates
P ≈ 0.95 × 5.67×10⁻⁸ × 1 × 300⁴ ≈ 1.5 kW.


3. Quick Review & Tips for KEAM

Concept Key Takeaway Quick Check
Thermal Expansion Materials grow when heated; use ΔL = αL₀ΔT Remember “α” is tiny for metals; big for plastics
Conduction Heat flows through contact; good conductors = metals Look for k values in tables
Convection Heat carried by moving fluid; think of a pot of soup Natural vs. forced – remember the fan helps
Radiation No contact needed; power ∝ T⁴ Black bodies radiate the most

Study Tip:

  • Draw a quick diagram: a hot rod → cold rod → expansion arrow.
  • For heat transfer, sketch a heat‑source, a medium, and a sink to see which path (conduction, convection, radiation) applies.

Practice Question (no answer)

  1. A 1 m long iron rod (α = 12×10⁻⁶ /°C) is heated from 20 °C to 120 °C. How much does it lengthen?
  2. A 0.5 m thick insulating wall has a thermal conductivity of 0.04 W/m·K. If one side is 30 °C hotter than the other, how much heat per second passes through 1 m² of the wall?

(Try solving before checking your notes!)


Good luck with your KEAM preparation!

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.