Class 10 (CBSE) /Science

Electricity

Electricity · free study notes · Updated

Electricity – Class 10 (CBSE)

Subject: Science
Topic: Electricity
Grade: 10


1. Simple Explanation

Electricity is the flow of electric charge (mainly electrons) through a material.

  • Charge: The basic property that can be positive or negative.
  • Current (I): Rate of flow of charge (ampere, A).
  • Voltage (V): Potential difference that pushes charges (volt, V).
  • Resistance (R): Opposition to flow (ohm, Ω).

When a voltage is applied across a conductor, electrons move, producing an electric current. The relationship among these quantities is given by Ohm’s Law.


2. Key Points

Concept What It Means Typical Units
Electric Charge Quantised amount of electric field. 1 coulomb (C) ≈ 6.24 × 10¹⁸ electrons. Coulomb (C)
Electric Current (I) Flow of charge per second. Ampere (A) = C/s
Voltage (V) Energy per unit charge; drives current. Volt (V) = J/C
Resistance (R) Material’s opposition to current. Ohm (Ω)
Ohm’s Law V = I × R. —
Power (P) Rate of energy transfer. P = V × I or P = I²R or P = V²/R. Watt (W)
Conductors vs. Insulators Conductors allow easy flow of electrons; insulators resist it. —
Series / Parallel Circuits Series: R_total = ΣR, same current. Parallel: V_total = ΣV, same voltage. —
Safety Always turn off power before working; use insulated tools; avoid touching live wires. —

3. Worked Example

Problem:
A 12 V battery is connected to a circuit containing two resistors (R_1 = 4,\Omega) and (R_2 = 6,\Omega) in series.
(a) Find the total resistance.
(b) Find the current flowing through the circuit.
(c) Find the voltage drop across each resistor.
(d) Calculate the power dissipated by each resistor.

(a) Total Resistance

[ R_{\text{total}} = R_1 + R_2 = 4,\Omega + 6,\Omega = 10,\Omega ]

(b) Current (Ohm’s Law)

[ I = \frac{V}{R_{\text{total}}} = \frac{12,\text{V}}{10,\Omega} = 1.2,\text{A} ]

(c) Voltage Drop

  • Across (R_1): [ V_1 = I \times R_1 = 1.2,\text{A} \times 4,\Omega = 4.8,\text{V} ]
  • Across (R_2): [ V_2 = I \times R_2 = 1.2,\text{A} \times 6,\Omega = 7.2,\text{V} ] Check: (V_1 + V_2 = 4.8,\text{V} + 7.2,\text{V} = 12,\text{V}) (matches supply).

(d) Power Dissipation

  • Power in (R_1): [ P_1 = I^2 R_1 = (1.2,\text{A})^2 \times 4,\Omega = 5.76,\text{W} ]
  • Power in (R_2): [ P_2 = I^2 R_2 = (1.2,\text{A})^2 \times 6,\Omega = 8.64,\text{W} ] Total power: (P_{\text{total}} = P_1 + P_2 = 5.76,\text{W} + 8.64,\text{W} = 14.4,\text{W}) which equals (V \times I = 12,\text{V} \times 1.2,\text{A}).

4. Quick Revision Summary

Topic Formula / Concept Quick Tip
Current (I = \frac{Q}{t}) 1 A = 1 C/s
Voltage (V = \frac{W}{Q}) Think of it as “push”
Resistance (R = \frac{V}{I}) Higher R → less current
Ohm’s Law (V = I R) Core relationship
Power (P = V I = I^2 R = \frac{V^2}{R}) Energy per second
Series (R_{\text{tot}} = \sum R) Same current
Parallel (\frac{1}{R_{\text{tot}}} = \sum \frac{1}{R}) Same voltage
Safety Always de‑energise first Use insulated tools

Remember:

  • Charge moves → current.
  • Voltage pushes → current flows.
  • Resistance resists → Ohm’s Law tells how much.

Use the worked example as a template for any series/parallel circuit problems. Good luck with your studies!

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.