Class 7 CBSE – Science
Topic: Electric Current
“Electric current is a flow of electric charge through a conductor.”
In the world of electromagnetism, current is the backbone that drives all electrical devices.
1. Basic Concepts
| Symbol | Quantity | Unit | Definition |
|---|---|---|---|
| (I) | Electric current | Ampere (A) | Rate of flow of charge |
| (Q) | Electric charge | Coulomb (C) | Amount of charge |
| (t) | Time | second (s) | Duration of flow |
| (V) | Voltage (Potential difference) | Volt (V) | Energy difference per unit charge |
| (R) | Resistance | Ohm (Ω) | Opposition to current flow |
| (P) | Power | Watt (W) | Rate of energy transfer |
| (E) | Energy | Joule (J) | Work done or energy stored |
1.1 What is an Electric Current?
- Current is the movement of charged particles (usually electrons) through a conductor (wire, metal, etc.).
- In a closed circuit, electrons drift from the negative terminal to the positive terminal of a power source.
1.2 Units & Symbol
- Ampere (A): One ampere equals one coulomb of charge passing per second.
[ I = \frac{Q}{t} \quad \text{(A)} ] - Coulomb (C): The charge of 6.242 × 10¹⁹ elementary charges.
2. Ohm’s Law – The Core Relation
Ohm’s Law states the proportionality of current, voltage and resistance in a linear conductor.
[ \boxed{V = I , R} ]
2.1 Derivation (Conceptual)
- Voltage (V) applies an electric field (E) along the conductor: (E = V/L) (where (L) is length).
- Electrons experience a force (F = qE) and drift with a drift velocity (v_d).
- The current density (J = nqv_d) (where (n) = number density, (q) = electron charge).
- The cross‑sectional area (A) gives (I = J A = nqv_d A).
- The resistance arises from collisions; (R) is proportional to (L/A) and inversely to conductivity (\sigma).
Combining yields (V = I R).
2.2 Important Formulae
| Formula | What it gives | Conditions |
|---|---|---|
| (I = \dfrac{V}{R}) | Current from voltage & resistance | Ohmic material |
| (V = I R) | Voltage drop across a resistor | Linear relation |
| (R = \rho \dfrac{L}{A}) | Resistance from material property | (\rho) = resistivity |
| (P = I V = I^2 R = \dfrac{V^2}{R}) | Power dissipation | Resistive load |
3. Measuring Current
| Instrument | Principle | Accuracy | Typical Use |
|---|---|---|---|
| Galvanometer | Detects deflection due to magnetic field of current | Low (≤ 0.5 A) | Early experiments |
| Ammeter | Measures current via magnetic field or shunt resistor | High (≤ 10 A) | Circuit testing |
| Multimeter (AC/DC) | Integrated electronic sensor | Very high | General purpose |
Tip: Always place an ammeter in series with the circuit; a voltmeter goes in parallel.
4. Current in Different Conductors
- Metals: Free electrons move easily; low resistance → high current for a given voltage.
- Non‑metals & Insulators: Very few free carriers → high resistance → negligible current.
- Semiconductors: Resistance depends on temperature and doping.
5. Tricky Points & Common Misconceptions
| Misconception | Reality |
|---|---|
| “Current flows from positive to negative” | In conventional notation yes, but actual electron flow is from negative to positive. |
| “Higher voltage always gives higher current” | It depends on the resistance; (I = V/R). |
| “Adding more wires always increases current” | Only if the added wires form a parallel branch of lower resistance. |
| “Resistance is constant” | In most real conductors, resistance changes with temperature, length, cross‑section. |
| “Current is a force” | Current is a flow of charge; the force is the electric field driving it. |
6. Practical Applications
| Application | Principle | Why It Works |
|---|---|---|
| Household wiring | Ohm’s Law + adequate gauge | Ensures safe current flow without overheating |
| Light bulbs | Resistive heating | (P = I^2 R) converts electrical energy to light/heat |
| Electric motors | Electromagnetic induction | Current in coils creates magnetic field → rotation |
| LEDs | Current‑controlled semiconductor | Limited current prevents damage and ensures light output |
7. Hard Practice Question (IIT‑JEE style)
Question
A copper wire of length 1 m and cross‑sectional area (1 \times 10^{-6},\text{m}^2) is connected to a 12 V battery.
(i) Calculate the current through the wire.
(ii) If the wire is replaced by a pure aluminum wire of the same dimensions, the resistance doubles. What will be the new current?
(iii) Explain why the resistance doubled using the concept of electron drift velocity and mean free path.
Solution Outline
- Find resistivity of copper (\rho_{\text{Cu}} = 1.68 \times 10^{-8},\Omega\text{m}).
- Compute (R_{\text{Cu}} = \rho_{\text{Cu}} L / A).
- Use (I = V/R).
- For aluminum, (\rho_{\text{Al}} \approx 2.82 \times 10^{-8},\Omega\text{m}) → (R_{\text{Al}} = 2 R_{\text{Cu}}).
- Compute new current