TS EAMCET /Physics

Kinetic theory

Thermodynamics & Waves · free study notes · Updated

Kinetic Theory of Gases

Physics – TS EAMCET


1. Simple Explanation

The kinetic theory explains the macroscopic properties of gases (pressure, temperature, volume) by considering them as a large number of tiny particles (atoms or molecules) that are in constant random motion.

  • Gas particles are tiny, far apart, and move in straight lines until they collide.
  • Collisions are perfectly elastic (no loss of kinetic energy).
  • Temperature is proportional to the average kinetic energy of the particles.
  • Pressure arises from particles striking the walls of the container.

2. Key Points

Concept Details
Assumptions of Kinetic Theory 1. Gas consists of many small particles.
2. Particles are in constant random motion.
3. Particle size ≪ mean free path.
4. No intermolecular forces except during collisions.
5. Collisions are perfectly elastic.
Average Kinetic Energy (\displaystyle \frac{3}{2}kT) per molecule; (k = 1.38\times10^{-23},\text{J/K}).
Ideal Gas Law (PV = nRT). Derived from kinetic theory when gas behaves ideally.
Mean Free Path (\lambda = \dfrac{kT}{\sqrt{2}\pi d^2 P}) where (d) is molecular diameter, (P) pressure.
Speed Distribution Maxwell–Boltzmann distribution; most probable speed (v_p = \sqrt{ \frac{2kT}{m} }).
Pressure from Collisions (P = \frac{1}{3} \rho \overline{v^2}) where (\rho) is mass density, (\overline{v^2}) mean square speed.
Effect of Temperature Increasing (T) increases average speed → higher pressure (if volume fixed).
Effect of Volume Increasing (V) decreases collision frequency → lower pressure (if temperature fixed).
Real Gases Deviations at high pressure, low temperature due to intermolecular forces & finite size.

3. Worked Example

Problem:
A cubic container (side = 0.10 m) contains 1.00 mol of an ideal gas at 300 K.
(a) Find the pressure inside.
(b) Determine the average speed of the gas molecules (assume (M = 28,\text{g/mol}) for nitrogen).

Solution:

(a) Pressure

Use Ideal Gas Law (PV = nRT).
(R = 8.314,\text{J/(mol·K)}).
(V = (0.10,\text{m})^3 = 0.00100,\text{m}^3).

[ P = \frac{nRT}{V} = \frac{1.00 \times 8.314 \times 300}{0.00100} = 2.49 \times 10^6 ,\text{Pa} \approx 2.5 ,\text{MPa} ]

(b) Average Speed

Average kinetic energy per molecule:
[ \frac{1}{2} m \overline{v^2} = \frac{3}{2}kT \quad\Rightarrow\quad \overline{v^2} = \frac{3kT}{m} ]

Molar mass (M = 28,\text{g/mol} = 0.028,\text{kg/mol}).
Mass of one molecule: (m = \frac{M}{N_A} = \frac{0.028}{6.022\times10^{23}} = 4.65\times10^{-26},\text{kg}).

[ \overline{v^2} = \frac{3 \times 1.38\times10^{-23}\times 300}{4.65\times10^{-26}} = 2.7\times10^4 ,\text{m}^2/\text{s}^2 ]

[ \overline{v} = \sqrt{\overline{v^2}} = \sqrt{2.7\times10^4} \approx 164 ,\text{m/s} ]

Answer:
(a) (P \approx 2.5,\text{MPa})
(b) Average speed (\overline{v} \approx 1.6 \times 10^2,\text{m/s})


4. Quick Revision Summary

Topic Key Equation What it Shows
Pressure from kinetic theory (P = \dfrac{1}{3}\rho \overline{v^2}) Pressure ∝ density × mean square speed
Ideal Gas Law (PV = nRT) Relates macroscopic variables via kinetic theory
Average kinetic energy (\dfrac{3}{2}kT) Temperature ↔ average kinetic energy
Mean free path (\lambda = \dfrac{kT}{\sqrt{2}\pi d^2 P}) Distance between collisions
Maxwell distribution (f(v) = 4\pi \left( \frac{m}{2\pi kT} \right)^{3/2} v^2 e^{-mv^2/2kT}) Speed probability distribution

Remember:

  • All macroscopic gas properties stem from microscopic motion and collisions.
  • Ideal gas behavior holds when intermolecular forces are negligible.
  • Deviations (van der Waals, real gas behavior) become significant at high pressure or low temperature.

Good luck with your studies!

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.