Mensuration – Study Notes
(Quantitative Aptitude – SSC Selection Post)
1. Simple Explanation
Mensuration is the branch of mathematics that deals with the measurement of geometric figures: finding lengths, areas, perimeters, volumes, and surface areas. In competitive exams, you’ll encounter problems on:
- Perimeter / Circumference
- Area of squares, rectangles, parallelograms, triangles, circles, trapeziums, etc.
- Volume and Surface area of cubes, cuboids, cylinders, cones, spheres.
Remember the basic formulas and practice converting between units (cm ↔ m, mm ↔ cm, etc.) quickly.
2. Key Points
| Category | Formula | Notes |
|---|---|---|
| Perimeter / Circumference | Rectangle: (P = 2(l + w)) Square: (P = 4a) Circle: (C = 2\pi r) |
Use ( \pi \approx 3.14 ) unless specified. |
| Area | Square: (A = a^2) Rectangle: (A = l \times w) Parallelogram: (A = b \times h) Triangle: (A = \frac{1}{2} b \times h) Circle: (A = \pi r^2) Trapezium: (A = \frac{1}{2}(a+b)h) |
For right‑angled triangles, (b) and (h) are the legs. |
| Volume | Cube: (V = a^3) Cuboid: (V = lwh) Cylinder: (V = \pi r^2 h) Cone: (V = \frac{1}{3}\pi r^2 h) Sphere: (V = \frac{4}{3}\pi r^3) |
Always keep the units consistent. |
| Surface Area | Cube: (SA = 6a^2) Cuboid: (SA = 2(lw + lh + wh)) Cylinder: (SA = 2\pi r (r + h)) Cone: (SA = \pi r (r + l)) (where (l) = slant height) Sphere: (SA = 4\pi r^2) |
For a cone, slant height (l = \sqrt{r^2 + h^2}). |
| Unit Conversion | (1,m = 100,cm), (1,cm = 10,mm) | Quick mental conversions help save time. |
| Common Pitfalls | 1. Forgetting the factor (\frac{1}{2}) in triangle area. 2. Mixing up radius and diameter. 3. Using (\pi = 22/7) when the problem states (\pi = 3.14). |
Double‑check units and constants. |
3. Worked Example
Question:
A cylindrical water tank has a radius of 4 m and a height of 12 m.
(a) Find its volume.
(b) Find the total surface area (including top and bottom).
(c) If the tank is filled with water up to a depth of 8 m, what is the volume of water inside?
(a) Volume of the cylinder
[ V = \pi r^2 h = 3.14 \times (4)^2 \times 12 = 3.14 \times 16 \times 12 ] [ V = 3.14 \times 192 = 603.84 \text{ m}^3 ]
(b) Total surface area
[ SA = 2\pi r (r + h) = 2 \times 3.14 \times 4 \times (4 + 12) ] [ SA = 6.28 \times 4 \times 16 = 6.28 \times 64 = 401.92 \text{ m}^2 ]
(c) Volume of water up to 8 m depth
Replace height (h) with 8 m: [ V_{\text{water}} = \pi r^2 h_{\text{water}} = 3.14 \times 16 \times 8 = 3.14 \times 128 = 401.92 \text{ m}^3 ]
Answers:
- (a) 603.84 m³
- (b) 401.92 m²
- (c) 401.92 m³
Quick check:
- Volume of water (401.92 m³) is exactly half of the total volume because the depth is half the height (8 m vs 12 m). That consistency confirms the calculations.
4. Quick Revision Summary
| Topic | Formula | Quick Tip |
|---|---|---|
| Perimeter (Rectangle) | (P = 2(l + w)) | Remember “2 × sum of sides”. |
| Area (Triangle) | (A = \frac{1}{2} b h) | Half the base‑height product. |
| Volume (Cylinder) | (V = \pi r^2 h) | Think “circle area × height”. |
| Surface Area (Sphere) | (SA = 4\pi r^2) | Four times circle area. |
| Unit Conversion | (1,m = 100,cm) | Convert by shifting decimal two places. |
| Common Mistake | Forgetting (\frac{1}{2}) or mixing radius/diameter | Double‑check dimensions before plugging in. |
Pro Tip: Always write down the known quantities, substitute them in the formula, and compute step‑by‑step. In time‑pressured exams, using a calculator with a memory function can save you a few seconds.
Happy studying! 🚀