Time–Speed–Distance (T‑S‑D) – Study Notes
AFCAT Quantitative Aptitude – 2024
Topic: Time‑Speed‑Distance (T‑S‑D)
1. Simple Explanation
The Time–Speed–Distance relationship is a basic kinematic formula used to solve problems involving constant motion.
[ \boxed{ \text{Distance (S)} = \text{Speed (V)} \times \text{Time (T)} } ]
- Distance (S) – Total ground covered (km, m, miles, etc.)
- Speed (V) – Rate of motion (km / h, m / s, mi / h, etc.)
- Time (T) – Duration of travel (h, min, s, etc.)
When any two of the three quantities are known, the third can be found by rearranging the formula:
| Known | Unknown | Formula |
|---|---|---|
| S, V | T | (T=\frac{S}{V}) |
| S, T | V | (V=\frac{S}{T}) |
| V, T | S | (S=V\times T) |
Important:
- Keep units consistent (e.g., all in km and h).
- If time is given in minutes, convert to hours: ( \text{h} = \frac{\text{min}}{60}).
- If speed is in km/h, time in hours, distance comes out in km.
2. Key Points
| # | Concept | Why It Matters |
|---|---|---|
| 1 | Units Consistency | Errors often arise from mixing km with miles or h with min. |
| 2 | Conversion | Minutes → Hours: divide by 60; Seconds → Hours: divide by 3600. |
| 3 | Average Speed | When speed varies, use average speed or total distance / total time. |
| 4 | Opposite Directions | If two objects move toward each other, their relative speed is the sum of their speeds. |
| 5 | Same Direction | Relative speed = difference of speeds. |
| 6 | Speed Change | For constant acceleration problems, use (S = V_i T + \frac{1}{2}aT^2). (Not typical in AFCAT, but good to know.) |
| 7 | Multiple Legs | For journeys with stops or changing speeds, calculate segment distances separately and sum. |
| 8 | Work‑Efficiency | “Time” can be expressed in “effort” units (e.g., hours of work). |
3. Worked Example
Problem
A train leaves Station A heading toward Station B at a constant speed of 90 km/h.
Another train leaves Station B heading toward Station A at 110 km/h.
The distance between the stations is 520 km.
How long will it take for the two trains to meet?
Solution
-
Identify knowns and unknowns
- Distance between stations (S = 520) km
- Speed of Train A (V_A = 90) km/h
- Speed of Train B (V_B = 110) km/h
- Time until they meet (T) (unknown)
-
Relative speed (since they move toward each other):
[ V_{\text{rel}} = V_A + V_B = 90 + 110 = 200\ \text{km/h} ] -
Use the T‑S‑D formula
[ S = V_{\text{rel}} \times T \quad\Rightarrow\quad 520 = 200 \times T ] -
Solve for (T)
[ T = \frac{520}{200} = 2.6\ \text{h} ] -
Convert to hours and minutes
[ 0.6\ \text{h} = 0.6 \times 60 = 36\ \text{min} ]
Answer: The trains will meet after 2 h 36 min.
4. Quick Revision Summary
| Item | What to Remember |
|---|---|
| Formula | (S = V \times T) (and its inverses) |
| Units | Keep all in same system; convert minutes to hours by ÷60 |
| Relative Speed | Add speeds for head‑on, subtract for same direction |
| Multiple Legs | Compute each segment separately then sum |
| Common Mistakes | Unit mismatch, forgetting to convert minutes, mixing up addition/subtraction in relative speed |
Practice Tip:
- Convert all quantities to km and h before plugging into the formula.
- Check dimensional consistency: km = km/h × h → km.
End of Notes