TOPIK /Quantitative Aptitude

Time & work

Commercial Maths · free study notes · Updated

Time & Work – Study Notes

(Quantitative Aptitude – TOPIK Preparation)


1. Simple Explanation

Time & Work deals with how long it takes for one or more workers (or machines, etc.) to complete a job, or how much work they can finish in a given time.

  • Work is measured in units (e.g., “a job,” “a piece of work”).
  • Rate of work is the amount of work done per unit time.
    • If a worker completes a job in 4 hrs, his rate is ( \frac{1}{4} ) job per hour.
  • Work done = Rate × Time.
  • Total time for a job = ( \frac{1}{\text{Total rate}} ) (if one worker) or ( \frac{\text{Work}}{\text{Total rate}} ) (if many workers/machines).

2. Key Points

Concept Formula Notes
Rate of a single worker ( r = \frac{1}{T} ) (T) = time to finish 1 job
Work done by a worker ( W = r \times t ) (t) = time worked
Combined rate ( r_{\text{total}} = r_1 + r_2 + \dots + r_n ) Add rates of all workers/machines
Time for combined workers ( T = \frac{1}{r_{\text{total}}} ) If one job
Work done together in (t) hrs ( W = r_{\text{total}} \times t )
Effect of adding/ removing workers Compare new total rates Quick mental check: more workers → lower time
Work left after (t) hrs ( \text{Left} = 1 - r_{\text{total}} \times t )
Partial job tasks Break job into subtasks, apply rates separately Useful for “first X workers finish Y% of job” problems

Common Traps

  • Confusing rate vs. time – always keep units (jobs/hr vs hrs).
  • Assuming equal work – check if workers have different rates.
  • Neglecting “part” of a job – compute work done first, then remaining.
  • Mixing “time” and “rate” in the same equation – keep them separate.

3. Worked Example

Problem:

Worker A can finish a job in 6 hrs. Worker B can finish the same job in 9 hrs. They work together for 3 hrs, then only A continues. How long will it take for A to finish the job?

Step‑by‑Step

Step Calculation Result
1. Rate of A ( r_A = \frac{1}{6} ) job/hr (0.1667)
2. Rate of B ( r_B = \frac{1}{9} ) job/hr (0.1111)
3. Combined rate ( r_{AB} = r_A + r_B = \frac{1}{6}+\frac{1}{9} = \frac{5}{18} ) job/hr (0.2778)
4. Work done together in 3 hrs ( W_{AB} = r_{AB}\times 3 = \frac{5}{18}\times3 = \frac{5}{6} ) of job 83.33 %
5. Work remaining ( 1 - \frac{5}{6} = \frac{1}{6} ) of job 16.67 %
6. A’s rate alone ( r_A = \frac{1}{6} ) job/hr
7. Time for A to finish remaining ( t = \frac{\text{remaining work}}{r_A} = \frac{1/6}{1/6} = 1 ) hr 1 hr
8. Total time ( 3 + 1 = 4 ) hrs

Answer: 4 hours total, with A finishing the last hour alone.


4. Quick Revision Summary

  • Rate = ( \frac{1}{\text{time to finish job}} ).
  • Work done = Rate × Time.
  • Combined rate = Sum of individual rates.
  • Time for job = ( \frac{1}{\text{combined rate}} ).
  • For partial work:
    • Find work done → subtract from 1 job → compute remaining time.
  • Always keep units consistent; double‑check that “rate” is jobs per hour and “time” is hours.

Practice Tip:
Write each worker’s rate as a fraction of a job per hour, add them, and use the reciprocal to find total time. If a worker leaves, recalculate the remaining job using the new combined rate.

Good luck with your TOPIK exam!

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.