Time & Work – Advanced Quantitative Aptitude Study Notes
Audience: MIT‑level students, quantitative aptitude competitors, or any learner who wants a solid theoretical foundation.
Notation
- (R) – work rate (units of work per unit time).
- (W) – total amount of work (units).
- (t) – time required.
- (n) – number of workers.
- (R_i) – rate of worker (i).
- (w_i) – fractional contribution of worker (i).
1. Basic Principles
| Concept | Definition | Formula |
|---|---|---|
| Work | Quantity of effort performed. | (W = R \cdot t) |
| Rate | Work done per unit time. | (R = \frac{W}{t}) |
| Time | Duration required to complete a job. | (t = \frac{W}{R}) |
These equations are derived directly from the definition of rate in calculus:
(R = \frac{dW}{dt}). For constant rates, integration yields (W = \int_0^{t} R,dt = R,t).
2. Work by Multiple Workers
2.1 Additive Rates
When workers work simultaneously on the same job, their rates add:
[ R_{\text{total}} = \sum_{i=1}^n R_i ]
Thus
[ t = \frac{W}{\sum_{i=1}^n R_i} ]
Proof (from first principles):
Let worker (i) contribute (R_i t) units in time (t). The sum of contributions equals (W):
[ \sum_{i=1}^n R_i t = W \quad \Rightarrow \quad t = \frac{W}{\sum_{i=1}^n R_i} ]
2.2 Work Done in Parts
If a job is divided into parts that workers tackle sequentially, the time is additive:
[ t = t_1 + t_2 + \dots + t_k ]
where each (t_j = \frac{W_j}{R_j}).
3. Variable Rate (Non‑Constant Productivity)
In many real problems, a worker’s rate changes due to fatigue, learning curves, or equipment degradation. Let (R(t)) be a continuous function. Then the work completed in interval ([0,T]) is
[ W = \int_0^T R(t),dt ]
3.1 Example: Exponential Fatigue
Suppose a worker’s rate decays exponentially: (R(t) = R_0 e^{-\alpha t}).
[ W = \int_0^T R_0 e^{-\alpha t},dt = \frac{R_0}{\alpha} \left(1 - e^{-\alpha T}\right) ]
Solving for (T) yields an implicit relation:
[ T = -\frac{1}{\alpha} \ln!\left(1 - \frac{W\alpha}{R_0}\right) ]
4. Edge Cases & Counter‑Intuitive Scenarios
| Edge Case | Observation | Explanation |
|---|---|---|
| Zero Rate | If (R=0) work never completes. | Division by zero in (t=W/R). |
| Infinite Rate | (t\to 0). | Mathematically, an idealized “instantaneous” worker. |
| Negative Rate | Means work is undone. | (t) becomes negative if (W>0). |
| Non‑Uniform Work | Job may be partially completed by one worker then finished by another. | Requires piecewise integration or additive rates. |
| Work Sharing with Unequal Fractions | Example: Worker A does 30% of work, B does 70%. | Use (w_i) fractions: (t = \frac{W}{R}), but (R) is weighted sum (R = w_A R_A + w_B R_B). |
5. Advanced Theory
5.1 Work as a Flow in Continuous Media
In fluid dynamics or manufacturing, work can be modelled as a flow quantity:
[ \frac{dW}{dt} = \int_{\Omega} \mathbf{J} \cdot d\mathbf{S} ]
where (\mathbf{J}) is the work flux (rate per unit area). This formalism allows for spatially varying rates and can be coupled with conservation laws.
5.2 Optimization of Time
Given constraints on workers’ rates or total cost, the optimal distribution of effort can be found via calculus of variations or linear programming.
Example Problem (Linear Programming):
Minimize (t = \frac{W}{\sum R_i}) subject to (c_i R_i \leq C_{\max}) (cost constraint). The optimal solution uses the worker with highest rate‑to‑cost ratio.
5.3 Stochastic Work Rates
When rates are random variables (R\sim f_R(r)), the expected time is
[ \mathbb{E}[t] = \mathbb{E}!\left[\frac{W}{R}\right] = \int_0^\infty \frac{W}{r} f_R(r),dr ]
For a Gamma distribution, this integral evaluates to (W/\mu), where (\mu) is the mean rate.
6. Challenging Problem
Problem Statement
Three workers, A, B, and C, have rates (R_A = 1) job/hour, (R_B = 2) jobs/hour, and (R_C = 3