Puducherry Police Sub-Inspector (SI) /Quantitative Aptitude

Time-speed-distance

Speed & Geometry · free study notes

Time–Speed–Distance (TSD) – Advanced Study Notes

(For the Puducherry Police Sub‑Inspector exam – Quantitative Aptitude)


1. The Basic Relationship

Symbol Meaning Units
(s) Distance travelled km, m, etc.
(v) Speed (constant) km h⁻¹, m s⁻¹, etc.
(t) Time taken h, s, etc.

Fundamental equation

[ s = v,t \quad\Longleftrightarrow\quad v = \frac{s}{t}\quad\Longleftrightarrow\quad t = \frac{s}{v} ]

Proof:
Speed is defined as the ratio of the infinitesimal displacement (ds) to the infinitesimal time (dt):
[ v = \frac{ds}{dt};;\Longrightarrow;; ds = v,dt ] Integrating from (t_0) to (t) (and (s_0) to (s)) gives (s-s_0 = v(t-t_0)).
Taking initial position and time as zero yields the formula above.


2. Extending to Variable Speed

When speed varies with time, (v=v(t)), we have

[ s = \int_{t_0}^{t} v(\tau),d\tau ]

Key cases

Scenario Integral Result
Uniform acceleration (a) (v_0 + a\tau) (s = v_0(t-t_0) + \frac12 a(t-t_0)^2)
Piecewise constant speed Sum of rectangles Add each (v_i,\Delta t_i)
Speed as a function of distance (v(s)) (\displaystyle \int_{s_0}^{s} \frac{ds}{v(s)}) Solve for (t)

3. Average Speed

For non‑uniform motion,

[ \bar v = \frac{\text{total distance}}{\text{total time}} = \frac{s_{\text{tot}}}{t_{\text{tot}}} ]

If the path is discretised into segments (i) with distances (s_i) and times (t_i):

[ \bar v = \frac{\sum_i s_i}{\sum_i t_i} ]

Why not: The harmonic mean of speeds is not the average speed unless times are equal.


4. Relative Motion

When two objects move relative to each other:

[ v_{\text{rel}} = v_A \pm v_B ]

  • Same direction → subtract (if (v_B) behind (v_A)).
  • Opposite directions → add.

Closing speed: (v_{\text{cl}} = v_A + v_B) (when moving towards each other).


5. Edge Cases & Common Pitfalls

Case Typical Error Correct Approach
Zero distance Dividing (v = s/t) → 0/0 Recognise that if (s=0), time is irrelevant; speed undefined.
Same speed, different times Assume equal time Use (s = v,t) separately for each.
Speed in different units Mixing km/h and m/s Convert all to a single unit before calculation.
Time given in minutes, distance in km Forget to convert minutes → hours (t_{\text{h}} = t_{\text{min}}/60).
Average speed with varying times Using arithmetic mean of speeds Use total distance / total time.
Direction sign Ignoring negative speeds Keep signs consistent; direction matters only for relative motion.

6. Advanced Concepts (MIT‑level)

6.1 Differential Equations for Speed

If a vehicle’s speed depends on distance due to friction or wind resistance:

[ \frac{dv}{ds} = -k v^2 \quad\Longrightarrow\quad \int \frac{dv}{v^2} = -k \int ds ] [ -\frac{1}{v} = -k s + C ;;\Longrightarrow;; v(s) = \frac{1}{k s + C'} ]

This model applies to motion under quadratic drag.

6.2 Integral of Reciprocal Speed

For a speed profile (v(t)) known only numerically, the travel time to cover distance (D) is

[ t = \int_{0}^{t_{\max}} \mathbf{1}_{{s(t) < D}},dt ]

where (s(t)) is the cumulative distance. Numerical quadrature (Simpson’s rule) is often required.

6.3 Optimization: Minimum Time for a Given Distance

Given a speed limit (v_{\max}) and an acceleration limit (a_{\max}), the fastest way to cover distance (D) is:

  1. Accelerate at (a_{\max}) until reaching (v_{\max}).
  2. Cruise at (v_{\max}).
  3. Decelerate at (-a_{\max}) to stop.

The switch distance can be derived from kinematics:

[ D = \frac{v_{\max}^2}{a_{\max}} \quad (\text{triangular profile}) ]

If (D) is smaller, a triangular profile without cruising is optimal.


7. Challenging Problem

Problem
A police patrol car starts from rest at point (A). It accelerates uniformly at (2.0\ \text{m s}^{-2}) for the first (200\ \text{m}). It then maintains a constant speed for the next (600\ \text{m}). Finally, it decelerates uniformly at (-3.0\ \text{m s}^{-2}) to a stop at point (B).

a) Compute the total time taken from (A) to (B).
b) If the patrol car must traverse the same route in (90\ \text{s}), what constant speed should it maintain in the middle segment?
c) Suppose a second car starts (30\ \text{s}) later from (A) with the same acceleration profile but a different constant speed in the middle segment. Determine that constant speed so that it catches the first car exactly at (B

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.