Time-speed-distance

Speed & Geometry · free study notes

Time – Speed – Distance (T‑S‑D)

Quantitative Aptitude – Advanced Study Notes
(Designed for the Andaman & Nicobar Islands Forest Guard exam – MIT‑level rigor)


1. Foundations

Symbol Meaning Units Typical Context
(S) Speed (velocity magnitude) ( \text{km/h} ), ( \text{m/s} ) Average speed, instantaneous speed
(T) Time ( \text{h} ), ( \text{s} ) Duration of motion
(D) Distance ( \text{km} ), ( \text{m} ) Path length traversed

The basic formula: [ D = S \times T \quad \Longleftrightarrow \quad S = \frac{D}{T} \quad \Longleftrightarrow \quad T = \frac{D}{S} ]

Note: All these variables assume constant speed during the interval considered. If the speed varies, we require integration or piecewise analysis.


2. From First Principles

2.1 Derivation via Limits

Let a particle move along a one‑dimensional path. The instantaneous velocity (v(t)) is defined by [ v(t) = \lim_{\Delta t \to 0} \frac{\Delta x}{\Delta t}. ]

If (v(t)) is constant (= V), integrating over time yields [ x(t) = x_0 + V t. ] The displacement (D = x(t_2)-x(t_1) = V (t_2-t_1)).
Hence, [ D = S \cdot T, ] with (S=V) and (T=t_2-t_1).

2.2 Units Consistency Check

  • (S) in ( \text{km/h} ) × (T) in ( \text{h} ) → ( \text{km} ).
  • (S) in ( \text{m/s} ) × (T) in ( \text{s} ) → ( \text{m} ).

Always confirm unit compatibility before plugging numbers.


3. Deeper Theory

3.1 Variable Speed

If speed varies as (S(t)): [ D = \int_{t_1}^{t_2} S(t), dt. ] When (S(t)) is given piecewise (e.g., two constant speeds over consecutive intervals), we sum the areas: [ D = S_1 T_1 + S_2 T_2 + \dots ]

3.2 Average Speed vs. Arithmetic Mean

Average speed over a trip is total distance divided by total time: [ S_{\text{avg}} = \frac{D_{\text{total}}}{T_{\text{total}}}. ] This is not the arithmetic mean of instantaneous speeds unless the speeds are equal over equal time intervals.

Counterexample: Two legs, each 1 h, speeds 50 km/h and 100 km/h.

  • Arithmetic mean: ( (50+100)/2 = 75 ) km/h.
  • Average speed: ( (50+100)/(1+1) = 75 ) km/h → same here, but if legs have differing durations, the two differ.

3.3 Reverse Engineering

Given two legs with same distance but different speeds, the total time is minimized by traveling faster. Conversely, given total time, the distance is maximized by traveling faster earlier.


4. Edge Cases & Common Pitfalls

Scenario Problem Correct Approach
Mixed units Speed in mph, time in minutes Convert all to a single unit (e.g., km/h & h).
Zero speed (S = 0) Distance (D = 0) regardless of (T).
Negative time (T < 0) Physically meaningless; indicates direction reversal or error.
Circular path Distance measured along a circle Use arc length (D = r \theta) where (\theta) in radians, then apply T‑S‑D.
Time intervals not contiguous Two trips separated by rest Sum times: (T_{\text{total}} = T_1+T_2); sum distances: (D_{\text{total}} = D_1+D_2).
Non‑uniform terrain Speed varies with slope Model (S(t)) piecewise or integrate (S(t)).

5. Advanced Topics

5.1 Relative Motion

When two agents move relative to each other, the relative speed is [ S_{\text{rel}} = |S_1 \pm S_2|, ] depending on direction. Distance between them evolves as [ D(t) = D_0 + S_{\text{rel}} t. ]

5.2 Time‑Dependent Speed Functions

Example: A vehicle accelerates uniformly from rest to speed (V) over time (T_a).

  • Speed: (S(t) = a t) where (a = V/T_a).
  • Distance during acceleration: [ D_a = \int_0^{T_a} a t, dt = \frac{1}{2} a T_a^2 = \frac{1}{2} V T_a. ]

After acceleration, if it travels at constant (V) for time (T_c): [ D = D_a + V T_c. ]


6. Challenging Problem (Forest Guard Context)

Problem Statement
A forest guard must traverse a straight path of unknown length (D) between two checkpoints, A and B.

  • From A to a midway point M, he walks at a speed (S_1) for (T_1) hours.
  • From M to B, he walks at a different speed (S_2) for (T_2) hours.
    The guard records that the total time (T_{\text{total}} = T_1+T_2) is exactly 30 % of the time it would have taken if he had walked the entire route at a constant speed (S_0).
    Additionally, the guard knows that (S_2 = 1.5 S_1).
    Find the ratio (T_1 : T_2).

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.