Fluid Mechanics & Surface Tension
Physics notes for BITSAT – beginner friendly
1. What is a fluid?
- Fluid = anything that can flow: liquid or gas.
- Imagine a cup of tea – it can be poured, or it can stay still when left alone.
- Fluids have density (ρ) and pressure (P) that act in every direction.
2. Pressure in a fluid
| Concept | Everyday analogy | Short formula |
|---|---|---|
| What is pressure? | The force of rain hitting your window | (P = \frac{F}{A}) |
| Pressure depends on depth | Water pressure in a swimming pool gets stronger the deeper you dive | (P = P_0 + \rho g h) |
| Atmospheric pressure | The weight of the air above you pressing down on you | (P_{\text{atm}} \approx 1 \text{ atm}) |
Tiny example:
Water at 2 m deep:
(P = 1000 \text{ kg/m}^3 \times 9.8 \text{ m/s}^2 \times 2 \text{ m} = 19.6 \text{ kPa}).
3. Hydrostatics – fluids at rest
| Principle | Analogy | Key idea |
|---|---|---|
| Pascal’s Law | Pressing on one part of a water‑filled syringe pushes the whole syringe | A change in pressure at one point spreads everywhere in the fluid |
| Archimedes’ Principle | A boat floats because it pushes water out of the way | The upward buoyant force equals the weight of the displaced fluid |
| Hydrostatic “head” | A water tower’s height gives its pressure at the ground | Pressure = ρ g × height of water column |
Tiny example:
A 10 kg crate floats in water (ρ = 1000 kg/m³).
Volume displaced = weight/ρg = 10 kg / (1000 kg/m³ × 9.8 m/s²) ≈ 0.001 m³ (1 L).
4. Fluid flow – dynamics
| Concept | Everyday analogy | Short description |
|---|---|---|
| Continuity | A garden hose: if you squeeze it, the water speed up | (A_1 v_1 = A_2 v_2) (area × speed constant) |
| Bernoulli’s Equation | Water in a pipe – higher speed means lower pressure | (P + ½ρv^2 + ρgh = \text{constant}) |
| Viscosity | Honey vs. water – honey resists flow | Roughly the “thickness” of a fluid; higher viscosity → slower flow |
| Reynolds Number (Re) | A slow‑moving car (laminar) vs. a fast‑moving one (turbulent) | (Re = \frac{ρ v L}{μ}) – tells whether flow is smooth or chaotic |
Tiny example:
Water (ρ ≈ 1000 kg/m³, μ ≈ 1 mPa·s) moving at 1 m/s in a pipe of diameter 0.02 m.
(Re = \frac{1000 × 1 × 0.02}{0.001} = 20,000) → turbulent flow.
5. Surface Tension
| Idea | Analogy | What it does |
|---|---|---|
| Definition | Like a thin elastic skin on water’s surface | The force that keeps a drop intact |
| Cause | Molecules in the liquid want to stick together (cohesion) | Surface molecules pull inward, minimizing surface area |
| Young–Laplace Equation | A balloon’s pressure difference depends on its size | (\Delta P = \frac{2γ}{R}) (γ = surface tension, R = radius) |
| Capillarity | Water climbing a paper towel | Capillary rise occurs when adhesion to the wall > cohesion inside the liquid |
| Contact Angle | A drop on a dry vs. a wet surface | Determines if a liquid wets a surface (θ < 90°) or beads up (θ > 90°) |
Tiny example – capillary rise:
For water (γ ≈ 0.072 N/m) in a glass tube of radius 1 mm (0.001 m),
(h = \frac{2γ \cosθ}{ρ g r}).
Assuming θ ≈ 0 (perfect wetting), (h ≈ \frac{2 × 0.072}{1000 × 9.8 × 0.001} ≈ 14.7 cm).
6. Quick Review (flashcards style)
| Question | Answer |
|---|---|
| What pushes a boat up? | Buoyant force (Archimedes) |
| What makes a soap bubble round? | Surface tension |
| Why does honey flow slower than water? | Higher viscosity |
| What tells if flow is smooth? | Low Reynolds number |
| Pressure inside a deep well? | (P = P_0 + ρgh) |
7. Practice Problem (very simple)
Problem
A 0.5 L water bottle is filled to the top. Inside a small 1 cm diameter tube, water exits at 0.3 m/s.
- What is the pressure difference between the inside of the bottle and the exit?
- Is the flow laminar or turbulent? (μ = 1 mPa·s)
Solution
- Continuity: (A = πr^2).
Radius of tube = 0.01 m → (A = 3.14 × 10^{-4}, \text{m}^2).
Flow rate (Q = A v = 3.14×10^{-4} × 0.3 = 9.4×10^{-5}, \text{m}^3/s