BITSAT /Physics

Fluid Mechanics, Surface Tension

Gravitation & Properties of Matter · free study notes

Fluid Mechanics & Surface Tension – BITSAT Study Notes

Audience: BITSAT‑level physics aspirants
Focus: Depth, derivations, exam‑relevant nuances, and a challenging practice problem.


1. Introduction

Surface tension governs a fluid’s behaviour at its interface with another medium (gas or another fluid).
Key phenomena: capillary rise, droplet shape, bubble formation, and many everyday technologies (soap bubbles, inkjet printing, microfluidics).


2. Hydrostatics – The Foundation

Concept Expression (SI) Remarks
Pressure in a fluid at rest (p = p_0 + \rho g h) (p_0): external pressure at the reference level; (\rho): density; (g): gravitational acceleration; (h): depth below the fluid surface.
Pascal’s Law (\Delta p = \rho g \Delta h) Pressure change is transmitted undiminished in an incompressible fluid.
Hydrostatic head (h = \frac{p}{\rho g}) Useful for pump calculations.

Derivation of Hydrostatic Pressure

Consider a fluid element at depth (h). The vertical force balance gives

[ p(h)A - p(h+dh)A = \rho g A,dh ;;\Rightarrow;; \frac{dp}{dh} = -\rho g ]

Integrating from a reference level (h=0) where (p=p_0):

[ p(h) = p_0 + \rho g h ]


3. Fluid Dynamics – Flow Quantities

3.1 Continuity Equation

For incompressible flow,

[ A_1 v_1 = A_2 v_2 \quad\text{or}\quad \rho A_1 v_1 = \rho A_2 v_2 ]

3.2 Bernoulli’s Equation (steady, inviscid, along a streamline)

[ p + \frac12\rho v^2 + \rho g z = \text{constant} ]

Derivation Sketch:

  • Apply work‑energy principle to a fluid element.
  • Pressure work (\delta W = -p,dV).
  • Kinetic energy change (\delta K = \frac12\rho,dv^2).
  • Gravitational potential change (\delta U = \rho g,dz).
  • Sum to zero → Bernoulli.

3.3 Viscous Flow & Reynolds Number

[ \text{Re} = \frac{\rho v L}{\mu} ]

  • Laminar if (\text{Re} < 2300) (in pipes).
  • Turbulent if (\text{Re} > 4000).
  • Drag force on a sphere: (F_D = \frac12 C_D \rho A v^2).
    • (C_D = \frac{24}{\text{Re}}) for low Re (Stokes flow).

4. Surface Tension Fundamentals

4.1 Definition

Surface tension ((\gamma)) is the force per unit length required to increase a fluid’s surface area.

[ \gamma = \frac{F}{L} = \frac{dE}{dA} ]

Units: N m(^{-1}) (or J m(^{-2})). Typical value for water at (20^\circ)C: (\gamma \approx 0.072,\text{N m}^{-1}).

4.2 Molecular Picture

  • Molecules within a bulk fluid experience equal cohesive forces from all directions.
  • Surface molecules lack neighbours on one side → net inward force → fluid minimizes surface area.

4.3 Young–Laplace Equation

For a curved interface between two fluids (e.g., air–water):

[ \Delta p = \gamma \left(\frac{1}{R_1} + \frac{1}{R_2}\right) ]

  • (R_1, R_2): principal radii of curvature.
  • Sign convention: (\Delta p =

Your note

Page 1

Doubt hai is topic me?

Free AI teacher se poocho — 24/7, step by step.